Pelican Parts Forums

Pelican Parts Forums (http://forums.pelicanparts.com/)
-   Off Topic Discussions (http://forums.pelicanparts.com/off-topic-discussions/)
-   -   Guitar builders question (http://forums.pelicanparts.com/off-topic-discussions/608518-guitar-builders-question.html)

LSA 05-13-2011 04:32 PM

Guitar builders question
 
Does the skew of the pickup effect the sound, is there any reason for putting (the bridge pickup usually) crooked?

like so
http://i51.tinypic.com/scwgt3.jpg

vs the standard inline with the neck.

WolfeMacleod 05-13-2011 04:53 PM

Yes it does. Having it slanted will give the highs more "highs" do to that part being closer to the bridge, and the low more "lows" due to being farther from the bridge.
Same principle as a strat or Tele bridge pickup.

Embraer 05-13-2011 05:01 PM

cool...i wondered the same thing

Rick Lee 05-13-2011 05:40 PM

Looks like an old Kramer. IIRC, EVH was the one who started doing that with humbuckers.

LSA 05-13-2011 05:46 PM

Quote:

Originally Posted by WolfeMacleod (Post 6020842)
Yes it does. Having it slanted will give the highs more "highs" do to that part being closer to the bridge, and the low more "lows" due to being farther from the bridge.
Same principle as a strat or Tele bridge pickup.

Ahh cool thanks, are there pickups built to be mounted like that or will the magnets in the pickup just be off center of the string and does it work with active pickups?

Yeah thats an old Kramer pic off google.

Gogar 05-13-2011 06:18 PM

I always thought it was so that the pole pieces would be centered under the string.

nostatic 05-13-2011 08:51 PM

Lots of discussion about this in bass-land. There are pages of arguments about regular P vs. reverse P. The theory is that reverse P (magnets for the D and G string) gives a fatter sound to those thinner strings. Regular P should do the opposite. I don't have any reverse P as I find regular P just fine. Roscoe angles the pups on their LG series basses but they'll admit that it mostly is for looks, and they will make them straight for special orders (and are straight on their SKB and Century models).

Zeke 05-13-2011 09:28 PM

And as a total novice, I thought it put the pick up under the center of sine wave.

slodave 05-13-2011 10:25 PM

Wolfe, it would probably be easier for you, than me, but how about setting up a demo? It shouldn't be too hard to setup a quick "log" guitar and move a pickup around.

Hmm, I have that spare neck for the LP project. I bet I could whip something up on Sunday.

slodave 05-13-2011 10:28 PM

Some info can be found here...

why are single coil bridge pickups angled? - Telecaster Guitar Forum

WolfeMacleod 05-13-2011 11:48 PM

Quote:

Originally Posted by slodave (Post 6021397)
Wolfe, it would probably be easier for you, than me, but how about setting up a demo? It shouldn't be too hard to setup a quick "log" guitar and move a pickup around.

Hmm, I have that spare neck for the LP project. I bet I could whip something up on Sunday.

Dave, I been meaning to set up a "log" for a long, long time. hah.

No room in the new shop to use any tools to build such a thing, either :(


LSA.. I seem to remember hearing about some pickups that were built for slant, but it's been so long I can't be sure about it.
Gibson Nighthawks, maybe...

LSA 05-14-2011 12:34 AM

Ok cool as long as a regular pup would work. Going to try to put together a guitar on the cheap for fun maybe come up with something cool.


All times are GMT -8. The time now is 01:09 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2025 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website


DTO Garage Plus vBulletin Plugins by Drive Thru Online, Inc.