Candle Soot as a Template for a Transparent Robust Superamphiphobic Coating

[M.D. Holloway]

This is actually pretty cool...

Candle Soot as a Template for a Transparent Robust Superamphiphobic Coating
by Xu Deng, Lena Mammen, Hans-Jürgen Butt, Doris Vollmer

Max Planck Institute for Polymer Research, Ackermannweg 10, D-55128, Mainz, Germany.

Center of Smart Interfaces, Technical University Darmstadt, 64287 Darmstadt, Germany.

Coating is an essential step in adjusting the surface properties of materials. Superhydrophobic coatings with contact angles greater than 150° and roll-off angles below 10° for water have been developed, based on low energy surfaces and roughness on the nano- and micrometer scales. However, these surfaces are still wetted by organic liquids such as surfactant-based solutions, alcohols, or alkanes. Coatings that are simultaneously superhydrophobic and superoleophobic are rare. We designed an easily fabricated, transparent, and oil-rebounding superamphiphobic coating. A porous deposit of candle soot was coated with a 25-nm-thick silica shell. The black coating became transparent after calcination at 600°C. After silanization, the coating is superamphiphobic and remained so even after its top layer was damaged by sand impingement.

[Mark Henry]

Didn't they also come up with cigarette butt tea coating as a corrosion inhibitor?

Edit: sorry not reading the whole thing again...I saw Xu Deng and assumed "made in China".

[M.D. Holloway]

The prob is not finding a suitable material that would provide that sort of contact angle but rather a means by which to deposit it and accept the substrate...