Pelican Parts Forums

Pelican Parts Forums (http://forums.pelicanparts.com/)
-   Off Topic Discussions (http://forums.pelicanparts.com/off-topic-discussions/)
-   -   laser grid projector (http://forums.pelicanparts.com/off-topic-discussions/708583-laser-grid-projector.html)

krystar 09-27-2012 12:47 PM

laser grid projector
 
does anyone know of a product that'll throw a set of user programmed laser grid lines on a table?

we have a need in factory floor to do jig alignments of various products.

i was looking at the Macrovision ShowWX but don't really need its full color capability. also not sure how visible it is in light factory floor setting. requirement would be bright enough to see, single color (although multiple colors would be nice too) grid lines. just no need for full color.

9dreizig 09-27-2012 03:48 PM

subscribing,, I know of single laser line products but I'm thinking you'd need an array of them..
What kind of money are you willing to pay ??

scottmandue 09-27-2012 03:51 PM

How precise does it have to be? We have some high end video projectors that will throw out a grid for screen alignment.

krystar 09-28-2012 08:10 AM

todd, i'm not really in the finance department but i think under 5k will prob get approved for the time and material savings we'll be getting.

scott, that's the initial idea i had. just using a widescreen projector to shoot down an image. the tricky thing is, its on the factory floor so it'll be brightly ambient light conditions. we've ordered a shortthrow 720p 3000lumen projector to see if it'll work. we tried with a normal conference projector and it was....visible, but i don't think really workable. we still have to do some engineering to make it production floor ready though. that's why i was leaning laser product. still visible in bright light conditions

lane912 09-28-2012 08:58 AM

this is what you need and where to rent it-
VER - Video Equipment Rentals - XLM HD30

lane912 09-28-2012 09:02 AM

or this-

PLSFT90 | Line Lasers | Pacific Laser Systemshttp://forums.pelicanparts.com/uploa...1348851764.jpg

krystar 09-28-2012 11:13 AM

holy damn 400lb projector...we also need it to be short throw though. height clearance is only 5ft.

the projection surface is a 8' x 4' press platform. multiple products needs to be set on the platform at specific locations according to a preprogrammed grid. there's an exhaust ventilation hood 5' up from the surface.

most of laser products i've seen are still only single line or cross line. not many grid ones. certainly not any programmable grid ones.

lane912 09-28-2012 02:44 PM

Quote:

Originally Posted by krystar (Post 7003102)
holy damn 400lb projector...we also need it to be short throw though. height clearance is only 5ft.

the projection surface is a 8' x 4' press platform. multiple products needs to be set on the platform at specific locations according to a preprogrammed grid. there's an exhaust ventilation hood 5' up from the surface.

most of laser products i've seen are still only single line or cross line. not many grid ones. certainly not any programmable grid ones.

and we hang two at a time and lay the images over the top of each other-
redundant live backup-


All times are GMT -8. The time now is 07:56 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2025 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website


DTO Garage Plus vBulletin Plugins by Drive Thru Online, Inc.