I am a clutz - blinker problem - 70 911t
 

Will somebody please shot me a picture of the top fuse box for my 70' 911t targa ?

Fuse # 8 has nothing hooked up to it now.

There is a red wire that has the length to go to the front of # 8. It originates from the small harness.

There is another red wire from the large harness.
If this wire is touched to a fuse that has power the old pop can style and new blinker relay clicks hard

The brake rear taillights wire "black/yellowish" are hooked up to # 2 fuse on the rear side of the fuse box but the length of the wire is excessive.

There is a "white/yellowish" wire that is not attached to anything and also it's from the small harness.

Thanks in advance Robert

You'll get a better response in the tech section. Porsche 911 Technical Forum - Pelican Parts Technical BBS
Here be nothing but dragons.

I seemed to recall a similar situation. A fuse with something on the bottom but not the top. Don't know if it was #8. Sorry my pics are on another computer.

FYI, our host has diagrams: Pelican Parts - Porsche 911 Parts Listings & Diagrams