Pelican Parts Forums

Pelican Parts Forums (http://forums.pelicanparts.com/)
-   Off Topic Discussions (http://forums.pelicanparts.com/off-topic-discussions/)
-   -   -6 deg f. and my furnace still has not kicked on. . (http://forums.pelicanparts.com/off-topic-discussions/790606-6-deg-f-my-furnace-still-has-not-kicked.html)

fastfredracing 01-06-2014 06:19 PM

-6 deg f. and my furnace still has not kicked on. .
 
Wood burners rock!. Stay warm guys.

azasadny 01-06-2014 06:44 PM

We have 2 furnaces, one for 1st floor and a second for the 2nd floor (Colonial, 2400sq ft). They are getting a workout!

onewhippedpuppy 01-06-2014 06:46 PM

Nice. My in-laws have a big high efficiency wood stove that has a sealed door, uses outside air for combustion, and has a heat exchanger and blower. That SOB will cook anybody on their main floor or 2nd floor, and they have a 6000 sq ft house.

We have a pellet stove in our basement that does a good job of helping the furnaces.

Hugh R 01-06-2014 07:33 PM

Its 50 degrees here and effing cold to me. I have a poorly insulated CA home and am running the gas heater. Put in new double paned windows and doors a few years ago, and its still cool. I hate vaulted ceilings.

onlycafe 01-06-2014 07:35 PM

this guy is good.

<iframe width="420" height="315" src="//www.youtube.com/embed/2vThcK-idm0" frameborder="0" allowfullscreen></iframe>

Baz 01-06-2014 07:46 PM

47 here! And dropping!

Hugh R 01-06-2014 07:47 PM

Ticked me off, I went to turn on the hot tub just now and a damn diverter valve sheared off from the pool to the spa. Pulled the old valve out in the brutal cold and sure enough it had sheared right the eff off! Must have been due to the sheer cold weather locking down the valve against the outer housing. I was working with a flashlight in my mouth, the freezing temps made the aluminum flashlight stick to my tongue and I had to rip it out. What pain!!

And then I had to go back inside with my flip-flops and shorts on and console myself.

onewhippedpuppy 01-06-2014 07:50 PM

Quote:

Originally Posted by Hugh R (Post 7843664)
Ticked me off, I went to turn on the hot tub just now and a damn diverter valve sheared off from the pool to the spa. Pulled the old valve out in the brutal cold and sure enough it had sheared right the eff off! Must have been due to the sheer cold weather locking down the valve against the outer housing. I was working with a flashlight in my mouth, the freezing temps made the aluminum flashlight stick to my tongue and I had to rip it out. What pain!!

And then I had to go back inside with my flip-flops and shorts on and console myself.

I wouldn't have that problem, because if I lived in CA I could only afford an apartment. Suddenly I feel much better.:p

dyount 01-06-2014 08:05 PM

I can't get an 8hr burn with temps as low as expected tonight. My furnace will run but that's what I've got it for. I've spent $300 on oil the last 2 yrs and should probably burn it a bit. Now how much does a chainsaw,gas,truck,Fiskars axe and how many hours cost?

crustychief 01-06-2014 08:07 PM

I installed new ducting in my attic and shot 3' deep insulation up there just in time for our cold snap ( temperature is forecast to be as low as +41 tonight ) .

On a serious note, I hope everyone of you back East pulls through this storm O.K.

pete3799 01-06-2014 08:15 PM

Can't beat wood heat
http://forums.pelicanparts.com/uploa...1389068080.jpg

VincentVega 01-06-2014 09:11 PM

Quote:

Now how much does a chainsaw,gas,truck,Fiskars axe and how many hours cost?
Too funny. I'm in the same boat, the stove has been humming all day. It's 'only' 10 outside and the house is comfy. I hate to turn on the oil but that's what it's for I guess.

Stay warm

GH85Carrera 01-07-2014 05:57 AM

Wood stoves are great, but the automatic fuel feed option is kinda pricey and hard to find. I sure love natural gas heat. Easy and cheap.

Stay wam guys.

MBAtarga 01-07-2014 06:38 AM

Quote:

Originally Posted by onlycafe (Post 7843642)
this guy is good.

<iframe width="420" height="315" src="//www.youtube.com/embed/2vThcK-idm0" frameborder="0" allowfullscreen></iframe>

I'd like to see him try that with some knotty white oak.

fastfredracing 01-07-2014 06:54 AM

I've watched a guy split wood like that with an old tire. I'll have to try it next season.

ledhedsymbols 01-07-2014 07:36 AM

When I was a boy in southeastern Montana, we heated and old drafty farmhouse with single panes with one freestanding wood stove. There was a stand of timber nearby, and as the oldest boy I was my father's woodcutting helper. This mean that he cut the standing timber, sized it into about three foot long sections and I helped load it into the truck. Back at the house, he would buck them into rounds the right length for the stove. My job was to split and stack. There was ponderosa pine, cottonwood (nasty stuff to burn) and a couple of other species too. They wouldn't do for my pop. He had a thing for burning only ash. That stuff was the hardest, knottiest, stringiest wood I have ever encountered. It burned long and hot when properly seasoned, I remember many many hours spent wrestling that stuff. One round I lost the woodsman's axe, splitting maul and splitting wedge in the same chunk. I had to ask my father for another wedge to finish the job. What a lot of work! Now I help my in-laws, they rent a hydraulic splitter once a year and I love them for that!

mikester 01-07-2014 08:08 AM

Quote:

Originally Posted by Hugh R (Post 7843664)
Ticked me off, I went to turn on the hot tub just now and a damn diverter valve sheared off from the pool to the spa. Pulled the old valve out in the brutal cold and sure enough it had sheared right the eff off! Must have been due to the sheer cold weather locking down the valve against the outer housing. I was working with a flashlight in my mouth, the freezing temps made the aluminum flashlight stick to my tongue and I had to rip it out. What pain!!

And then I had to go back inside with my flip-flops and shorts on and console myself.

Somebody call FEMA!!!

VincentVega 01-07-2014 08:14 AM

Quote:

I've watched a guy split wood like that with an old tire.
Bungee or ratchet strap works fun, until you hit it. :)

Quote:

I'd like to see him try that with some knotty white oak.
x2, doesnt work for everything but it's a time saver for wood that splits well

I grew up moving wood around too, some great memories.

JavaBrewer 01-07-2014 08:24 AM

Our 'new' old house came with a Harman wood pellet stove. It is located in our great room and does an amazing job keeping the place warm and cozy. It costs $2/day if we leave it running 24/7.

Porsche-O-Phile 01-07-2014 08:47 AM

Agreed - I installed a wood pellet stove this past fall and it's been an absolute godsend. Total fuel costs so far this year are about $400 on pellets and $200 on fuel oil (mostly to keep making domestic HW for showers, dishwashing and such). It's also a safety net that'll kick on at 60 degrees if the pellet stove goes out when I'm away from home or whatever.

Last year I spent over $1,500 on heating oil. F*CK OIL! I'm never going back. Next step is to finish plumbing up my electric HW heaters (one 40 gallon, one "instant" tankless) and tell the oil companies to stick it where the sun don't shine for good. At that point the oil fired boiler will be kept around for emergency backup use only - permanently.

I have a wood-burning stove in my shop and am considering one for the basement since I have a virtually limitless supply of wood to burn (and it's renewable) out back, I just hate dragging that stuff into the house even if it is the basement. If I do I bet I can hit 77 degrees year round with no oil burning and little pellet use. :)

Insulation helps too.


All times are GMT -8. The time now is 06:58 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2025 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website


DTO Garage Plus vBulletin Plugins by Drive Thru Online, Inc.