|
Any of you guys recognize this sand filter? I can't find any markings on it. Older Shasta pool at Thuys moms house. Leaking around the top, needs a gasket I suppose, just need to know what brand I'm shopping for.
|
|
If she lives anywhere near central Phoenix, just take the top off and run it down to Checker Pool and Pump at 24th St and Indian School. They will figure out what o-ring is needed.
|
She lives in chandler. I'll run by NPS and see if they have any ideas.
|
Looks like a Pentair Triton.
PENTAIR TRITON® TR100C & TR140C FIBERGLASS SAND FILTER PARTS |
Guessing I need seal 8 on the diagram? Anything else I should plan on replacing while ive got it open.
|
Like a car, replace all the upper seals and o-rings while you are in there. They wear for the same reasons.
|
Replace the sand.
|
Use silicon grease on all the o-rings when you re install. Liberally.
|
| All times are GMT -8. The time now is 09:15 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2025 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website