Pelican Parts Forums

Pelican Parts Forums (http://forums.pelicanparts.com/)
-   Off Topic Discussions (http://forums.pelicanparts.com/off-topic-discussions/)
-   -   How easy is it to make custom vinyl graphics for a car? Joe Bob? (http://forums.pelicanparts.com/off-topic-discussions/931067-how-easy-make-custom-vinyl-graphics-car-joe-bob.html)

G50 10-04-2016 09:32 AM

How easy is it to make custom vinyl graphics for a car? Joe Bob?
 
There was a "pinstriping" sticker in the 80s that was used on 3 and 6 series BMWs, mostly in Europe.

I can't find it anywhere, at least for a 3 series.

How easy would it be to reproduce it from pictures (its the black stripes on the red car)? Fortunately it's about as simple a design as possible. I could provide the length by measuring the car, and the width could be estimated fairly closely.

I'd like to give it a try if it isn't insanely expensive.

http://www.bmwe21.net/E21_editionM.jpg

G50 10-04-2016 09:36 AM

http://i993.photobucket.com/albums/a...ps738f3d22.jpg

GH85Carrera 10-04-2016 10:06 AM

It is real easy. Just whip out your checkbook or credit card.

Find a supplier like Joe Bob or a local shop to you. The best part is it is easily reversible if you get tired of it or the next owner does not like it.

Dantilla 10-04-2016 10:07 AM

Check with a local sign shop. They usually have everything needed to make custom vinyl graphics.

Joe Bob 10-04-2016 11:31 AM

You need the software, the cutter and material. AND patience. It's an acquired skill to weed, mask and apply.

porsche4life 10-04-2016 11:59 AM

Yup any local sign and graphics shop.


Not that difficult to weed, mask and apply. I could do it by the time I was 10 or so. ;)

Joe Bob 10-04-2016 12:01 PM

And how many did ya screw up before being competent? Some colors are more of a PITA than black.

porsche4life 10-04-2016 12:02 PM

Well for a 10 year old I was pretty good, and just Messing around with my own stuff.

It's not hard though, just takes some patience and a steady hand. ;)

jorian 10-04-2016 12:04 PM

You should be able to get the posted examples done for +-$250 by a competent shop. Supply and install.

Joe Bob 10-04-2016 01:01 PM

I'm better priced than that.....


All times are GMT -8. The time now is 08:43 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2025 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website


DTO Garage Plus vBulletin Plugins by Drive Thru Online, Inc.