impale a golf ball?

[id10t]

OK so one of the matches we shoot is golf balls from 15 to 150 yards. Currently they get duct taped to fine wire and hung but they tend to fly off when a just right hit happens.

Anyway Ive got a plate rack type set up but for it to work I need to impale the golf ball on a piece of 8-32 all-thread Going to add nuts and washers to prevent it from sliding up/down/off

After I get the balls on the current rack id like to set up a few spare balls as well

So Im thinking either drilling a hole or using something as a spike and heati g it and pushing it through.

Ideas?

[Tobra]

drill a hole

[island911]

Older balls used Surlyn (a thermoplastic ionomer) the newer are urethane (a thermoset)

So, what Tobra said.

Besides, even if you had old thermoplastic versions, heat would make a hot mess.

[gr8fl4porsche]

Yep, drill bit works just fine. Drilled a bunch of them when I made a Ladder Golf game.

[id10t]

After I get holes drilled, should i try to coat the all-thread with gorilla snot or similar, or try to get some into the hole before putting in the all-thread?

[island911]

Why?

I'm not clear on the goal here. When you say one of the matches we shoot is golf balls from 15 to 150 yards. I'm reading that you are using the balls for target practice; yes?

Keep it simple. is my advice. Under size the hole and get a bit of interference fit. Should suffice. (shrug)

[id10t]

Originally Posted by island911

Why?

I'm not clear on the goal here. When you say one of the matches we shoot is golf balls from 15 to 150 yards. I'm reading that you are using the balls for target practice; yes?

Keep it simple. is my advice. Under size the hole and get a bit of interference fit. Should suffice. (shrug)

Yup, targets Depending on which range we have, we either use auto/revolvers in 22lr at 15 to 25 yards, banks of 10 balls, 30 round limit, fastest time wins, any balls still standing are a 5 second penalty. Same with iron sight carbines at 25 to 50 yards. If we have the 200 yard range available, banks of 10 at 50, 75, 100, 125 and 150 yards from a bench with various grades of 22lr "target" guns. One cold bore fouler per bank, 10 shots only. Accuracy is the only thing that counts. Savages, CZs, 10/22 builds are most popular but the occasional Annie or Suhl or Win52, etc. show up.

My big issue is time - I'm 46 and the youngest of the regular shooters, so tracking down golf balls that went flying 10 to 50 feet past the target stand is no fun, and slows the matches down too much especially when we have more than a few shooters (we can only close the public range for a 4 hour block starting at 8am on a Sunday)

Gonna go drill a few balls and take a pic of my swinger/plate set up for ya

[id10t]

And it is complete.

My golf ball target rack. Tired of chasing them... a 1/2" rod, some eye hooks with a 1/2" hole in them, some 1/2" ID pipe fittings (threaded on all 3 holes), some small washers, nuts, and 8-32 all thread with a golf ball on top.

[Jims5543]

Screw this into back of ball tie wire to it?

[id10t]

Originally Posted by Jims5543

Screw this into back of ball tie wire to it?

We've done that. At 50 adn 100 yards, a 22 will hit hard enough to break a thin wire, golf ball goes flying with part of the wire attached...

[Jims5543]

Cheap cast net draped behind to catch the balls, eventually it will had to be replaced as it gets shot up.

[flipper35]

You know, they make a swinging target for .22 that is the size of a golf ball? Just for future reference.

[Steve Carlton]

Why the hatred for golf balls?

[Buckterrier]

[QUOTE=island911;9630781]Older balls used Surlyn (a thermoplastic ionomer) the newer are urethane (a thermoset)/QUOTE]

Titleist, specifically, uses Surlyn, (DuPont product), on all golf balls with the exception of the ProV line. That cover material is a urethane.
But yes I'd drill a tiny hole to insert a screw and dangle it from a piece of fishing line or something.
I like the idea of trying to pop a golfball at long yardage.

[WPOZZZ]

I couldn't see it at 150 yds.

[Buckterrier]

Originally Posted by WPOZZZ

I couldn't see it at 150 yds.

No but your scope could

[id10t]

Originally Posted by WPOZZZ

I couldn't see it at 150 yds.

A 20x scope helps a lot for me