![]() |
I've used Leatherique on many occasions in the past and it's a good product but I'd like to try 303 for a change.
I've also used Obenauf's for smaller items and that works very well. |
More from the "Car Cleaning Guru". :D
At 13.20 he's using 303 again. <iframe width="560" height="315" src="https://www.youtube.com/embed/BlUcG34Htbs" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen></iframe> <iframe width="560" height="315" src="https://www.youtube.com/embed/DnS7uQjIKlA" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen></iframe> |
^^ I do agree with the video in that too many people these days are simply smearing leather conditioners and creams into modern, coated leather. He only touched on treatment of older leather. I would emphasize that older leather, especially in dry climates needs periodic conditioning.
The bad thing about coated or sealed leather these days is that it doesn’t breathe. Isn’t that one of the best reasons to have it? In my BMW 128i my back gets sweaty in warm weather - doesn’t happen in my old Porsche. I do use 303 for the 128 leather but leather product for the 911. |
I agree... It's pretty much the same as sitting on vinyl unless the leather is perforated.
|
Quote:
I want this guy to detail my car. I'd say that I wished he listed the products that he used, but since he's in the UK, it would probably be a huge pain to get them over here. Now I need to go hunt down some good cleaner, sealer and protectant for the Boxster. |
Quote:
|
I stopped by the auto parts shop today. Review soon. :D
http://forums.pelicanparts.com/uploa...1517813482.jpg |
Great test McLovin, been using 303 on the rubber, plastic, vinyl parts on our boats for years. It's available off the shelf at Walmart and most marine super markets, hardware stores. Another good product unrelated to 303 is Boeshield T-9. Developed by Boeing for aircraft as a rust corrosion inhibitor and water proof lubricant.
|
Awesome test OP, thank you so much for that!!!!
FYI 303 on modern 'leather' will make it slippery as heck particularly if you buff it. |
kudos to you for doing the test.
I was hoping you might have done a section with another product to also compare but thanks of the lead on the 303. never heard of it. my 930 has always been garage kept but I am still worried about the rubber on it. I just tried the mcguires spray on wax. it seems to work pretty good although I am not going to do a 3yr test on it. I have had issues with other waxes on my front hood and this one I don't seem to have any problems. it may not last as long as others but it is easy. |
I'll give it a try. That was a pretty impressive test. Like "drcoastline" says, Boeshield T-9 is a fantastic product - been using it for years on everything from bearings to the steel surfaces on my table saw, drill, etc. Good for lubricant, penetrating fluid, mild antiseize, corrosion inhibitor, & whatever else you can find to use it for.
|
The 303 protectant is a must for protecting sunbrella! This product is a no brainer when it comes to protecting (waterproofing) anything sunbrella fabric, especially on a boat (mainsail cover, helm cover, winch covers, bimini tops, hatch covers, etc, etc). I have been using 303 on my sailboat for many years, but never considered using it anywhere on the Porsche.
So, based on what I am learning here, I will start with my rubber bumperettes and rubber trim on my 1973.5T and then in the interior areas. Great stuff. Thanks Bob |
Yep, good stuff. Been using it for 15+ years. They make a version specifically for fabric (or at least they used to), which was great for 911 cab tops.
I know they were bought out by Eagle a while back, so hopefully they haven't (and won't) monkey with the formula. Leatherique is good stuff as well, but it's certainly more greasy/oily. Definitely more geared towards the restoration/rejuvenation (hydration) of older leather. Not even sure that it has a UV protectant in it (?). Plus, it's really only useful/effective on older cars with non-coated leather. Leather in most modern cars is typically "coated" with a heavy plastic coating/polymer for durability. So, using Leatherique in that application is basically a waste of time/money. You are better off using straight distilled water to hydrate the leather in newer cars. The only other stuff for plastic/vinyl/rubber with a UV protectant in that I would bother with would be Vinylex (a Lexol product), but I prefer 303 over that. YMMV... |
https://www.goldeagle.com/brands/303-products/
I'll be giving this a try as well. http://forums.pelicanparts.com/uploa...1517875339.jpg
|
Quote:
Quote:
|
Quote:
|
OK, things I need,
sealant and protectant for interior leather including the dashboard 303 fabric guard for convertible top boeshield for metal stuff |
washed and cleaned the car yesterday, had bottles of 303 regular and 303 fabric guard, the interior and exterior got the regular and the conv top got the fabric guard. THe 303 smells good which is a plus.
|
I have been using 303 since this thread popped up.
Great on exterior trim and dash...really great. Not shiny at all, looks the business. |
Quote:
|
All times are GMT -8. The time now is 06:22 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2025 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website