|
|
|
|
| Author |
|
|
Registered User
Join Date: Apr 2020
Posts: 4
|
964 Backdate project
Hey, so started this project almost 4 years ago and have hit a wall. I am trying to find someone that can finish the body work, or find someone that knows how to 3d scan. From the pictures you can tell that the right side fenders are complete and then somewhat prepared for 3d scanning, but was never finished. If anyone has any good ideas or can get me in touch with the right people please let me know.
    
Last edited by mike_adams01; 04-10-2020 at 10:25 AM.. |
||
04-10-2020, 10:22 AM
|
|
|
Registered
Join Date: Mar 2014
Location: Palm Coast FL
Posts: 1,194
|
Location?
__________________
78 911 st backdate 87 944 00 996 |
||
|
04-10-2020, 01:57 PM
|
|
|
Registered User
Join Date: Apr 2020
Posts: 4
|
Quote:
|
||
|
04-10-2020, 02:02 PM
|
|
|
Registered
Join Date: Jul 2013
Posts: 1,104
|
I scanned the interior of my rally car with the HandySCAN to build my cage. Pretty easy for what i needed as I didn't need the surface data and only wanted it as reference. So you need someone to scan, rebuild data into surfaces, then mirror parts and design tools to be laid up in? A fair amount of work for sure and cheaper to buy all new parts from https://www.f-s-h.com/Backdate-911-Singer-Look_2
 
Last edited by 3literpwr; 04-11-2020 at 04:20 AM.. |
||
|
04-11-2020, 04:11 AM
|
|
|
Registered User
Join Date: Apr 2020
Posts: 4
|
That is an impressive roll cage and thanks for the website.
|
||
|
04-11-2020, 06:14 AM
|
|
|
Registered User
Join Date: Apr 2020
Posts: 4
|
I have found a company that will scan the car and put it into a CAD file. The problem is still finding someone that can turn a CAD file into a real fender.
|
||
|
04-14-2020, 10:41 AM
|
|
|
