Pelican Parts
Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   Pelican Parts Forums > Miscellaneous and Off Topic Forums > Paint, Bodywork & Detailing Forum


Reply
 
LinkBack Thread Tools Rate Thread
Author
Thread Post New Thread    Reply
Registered
 
Join Date: Oct 2009
Posts: 568
Paint ??

Hello. what is this type of paint that was used originals?


Regards John.

Old 01-06-2010, 07:30 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #1 (permalink)
dkbautosports.com
 
962porsche's Avatar
 
Join Date: Feb 2009
Location: branford ct
Posts: 3,638
i use a color called rally black . its a semi gloss single stage with a catalyst . but an other good match if you don't want to buy a hole QT. is 5-star's trim black in a spray can . part #5911 . 15 oz can . its an enamel so it will hold up better than a laquer which most of them are .
Old 01-06-2010, 04:09 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #2 (permalink)
Registered
 
Join Date: Oct 2009
Posts: 568
As you can see the edge may not last. What is the error and what can I do for a good reslutat?It has just been painted by a profesional

sincerely, john

Last edited by jeos; 01-07-2010 at 04:27 AM..
Old 01-07-2010, 04:18 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #3 (permalink)
dkbautosports.com
 
962porsche's Avatar
 
Join Date: Feb 2009
Location: branford ct
Posts: 3,638
john you need to get some fine line tape remask it . feather the edge (sand out ) of the flaking black paint and refinish . why did it happen ? the person that did the job .did not sand right up to the tape edge (and i do meen right up to it) its a pain in the butt to do . less than half of the so called profesionals are actually profesionals . that realy looks like hell the shine is not right there is way to much peal and what is the edge next to the screening . it should have been sanded better . most shops will just red pad prep for some thing like that .when it needs to be sanded with 500 grit wet or dry paper .
Old 01-08-2010, 03:44 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #4 (permalink)
Registered
 
Join Date: Oct 2009
Posts: 568
Porsche 962. I will even grind it down now. The paint you call rally Black has a code/number?


sincerely, john

Last edited by jeos; 01-08-2010 at 08:01 AM..
Old 01-08-2010, 05:57 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #5 (permalink)
dkbautosports.com
 
962porsche's Avatar
 
Join Date: Feb 2009
Location: branford ct
Posts: 3,638
becouse sikkens will not sell there coatings to people that don't have repair shops . you can use BASF's RM UNO sc804 with dh42 or 46 hardeners and ur50 reducer mixed 4-1-1 . RM auto paint is the sister co. of glasurit . i use rally black from sikkens just becouse its about 10% cheaper . but it will give you the same finish and longevity .
Old 01-11-2010, 02:24 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #6 (permalink)
 
Registered
 
Join Date: Oct 2009
Posts: 568
Huge help. Thank you.

sincerely, john.

Old 01-12-2010, 04:11 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #7 (permalink)
Reply


 


All times are GMT -8. The time now is 06:07 AM.


 
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2025 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website -    DMCA Registered Agent Contact Page
 

DTO Garage Plus vBulletin Plugins by Drive Thru Online, Inc.