![]() |
|
|
|
Registered
|
Quarter Panel Replacement Question - 72T Coupe
I recently purchased a 72T coupe that had been converted to a turbo body style several years ago. I intend to convert if back to the original body style and was wondering if narrow body quarters from a 74 through 77 911 coupe would also work for that purpose.
I realize that 69 to 73 coupe quarter panels would probably be best, but wasn't sure if 74 through 77 could also work. Any feedback or advice on this would be greatly appreciated. Thanks, Mike |
||
![]() |
|
Registered
Join Date: Sep 2002
Location: Lake Tapps, WA
Posts: 3,070
|
Very similar. Differences are....
1. Obviously the oil filler in the pass rear qtr 2. Flange under the tail light 3. There might be a slight difference on the lower edge of the qtr panel where the side of the bumper/trim mounts.
__________________
'67 911S '69 911S, '70 911ST '73 911T Targa Signal Yellow '78 911SC backdate |
||
![]() |
|