|
|
|
|
| Author |
|
|
Reiver
Join Date: Nov 2011
Posts: 57,439
|
911 sc Speedo question
Going to open it up to clean the glass and face....works fine but always 6 mph fast (as are many I understand)...I am running stock sized Fuchs/tires btw.
The pic below shows the 'set' for the sweep hand/needle when you lift it beyond the post prior to removal....a reference point for replacement. I am guessing that if I put it further 'south' in relation to a 6 mph measurement it might actually register close to actual speed... Has anyone done this with there gauge?  That is a pic from Wayne's tutorial...the SC has no resting pin for the needle but my question is the same....
__________________
De Oppresso Liber Strength and Honor 5th Legion Last edited by Reiver; 12-14-2018 at 10:22 AM.. |
||
12-14-2018, 09:47 AM
|
|
|
Registered
|
Not sure that’s would be a good idea, I sent my speedometer off a couple of times to get it actuate never got it perfect. Kinda just accepted, here is and interesting product that might help
Official home page of the Yellow Box Speedo Recalibrator
__________________
82 SC Twin Plug 3.2 SS ,46 PMO 
|
||
|
12-14-2018, 03:41 PM
|
|
|
Reiver
Join Date: Nov 2011
Posts: 57,439
|
I know....crp shoot at best...I'll check that out.
__________________
De Oppresso Liber Strength and Honor 5th Legion |
||
|
12-14-2018, 05:15 PM
|
|
Old School
