What bumper is this????

[JabsZA]

I came across the following 911 and i really like the front bumper:



I believe the singer cars also use this look.
Upon some research - it seems like the closest i get is to the 911 R model.



However, i notice that the 911 R model is narrow body....so on a flared look one would also need to have a wider top blade and from a lower perspective - add a rubber splitter to complete the look.

I am wondering whether one can buy this setup as a package, or whether this is a customer job. Any ideas?

[Dueller]

That is a Singer. You scan buy it from Singer. Unfortunately it is sold only attached to a $500.000.00 car,

[mickey356]

First of all, what car do you have?
You might be better modifying a lower valance if it's a impact bumper car. Do you need the oiler cooler vent/hole (longer center hole)?
If your car is a long hood, finding a rubber splitter for a pre 74 car might be difficult. Of course if it's an impact bumper car you can use the stock one.

[rxtrom]

I am bumping this up as I am looking for a 911R type front bumper for a turbo front end. I looked at TRE, GT racing and some others but they are all for the narrow LWB esque cars.

Thanks in advance.

[Dpmulvan]

Originally Posted by rxtrom

I am bumping this up as I am looking for a 911R type front bumper for a turbo front end. I looked at TRE, GT racing and some others but they are all for the narrow LWB esque cars.

Thanks in advance.

You'll have to fabricate one yourself or pay someone else to do it for you. What your looking for is not available.

[tholyoak]

https://www.f-s-h.com/Front-bumper-for-964-to-Singer-style-conversion