|
|
|
|
| Author |
|
|
Registered
|
911SC rear badge help.
Could someone with a wingless SC engine lid help me out?
The 911SC badge on my rear lid is all the way at the bottom from a tail that was once there. This weekend I am having it repainted and would like to correctly place the badge where it's supposed to be. Could someone kindly take a couple quick measurements on how far down from the grill this badge is supposed to be? Even better would be the measurement from the drilled holes themselves but I will take whatever I can get. It would be much appreciated. Thanks Vinny 
__________________
-Vinny 1983 911SC |
||
12-14-2005, 08:52 AM
|
|
|
Registered
|
bump?
__________________
-Vinny 1983 911SC |
||
|
12-14-2005, 11:58 AM
|
|
|
Registered
|
911SC emblem.....
I have the same problem on my SC. I am going to use this picture and space the emblem down about 2 time the height of the "911"
part of the emblem from the vent edge. That shoud be very close to being correct. I am going to put down a wide piece of tape to measure and mark the locations of the retaining pin holes and make a cardboard template to actually mark the hole locations. Just make certain to keep the emblem parallel with the vent opening and centered on the engine lid. You can drill the holes slightly oversize to allow for some final adjustments. Good luck!
__________________
FEC3 1980 911SC coupe "Zeus" 3.3SS god of thunder and lightning |
||
|
12-14-2005, 12:15 PM
|
|
|
Registered
Join Date: Sep 2004
Location: Fort Collins, CO
Posts: 631
|
46mm and 59mm onmy car.
__________________
Sheena is a punk rocker Suzy Is A Headbanger Heidi Is A Headcase Judy Is A Punk The Ramones' earliest titles included 'I Don't Wanna Walk Around with You,' 'I Don't Wanna Go Down to the Basement,' and 'I Don't Wanna Get Involved with You.' Dee Dee later said, "We didn't write a positive song until 'Now I Wanna Sniff Some Glue'." |
||
|
12-14-2005, 12:17 PM
|
|
|
Registered
Join Date: Sep 2004
Location: Fort Collins, CO
Posts: 631
|
 
|
||
|
12-14-2005, 12:21 PM
|
|
|
Registered
|
coloradoporsche
Thank you for doing that. Those pics are exactly what I was hoping for. Fred I'll do the same as you with the tape and cardboard. Thanks! Think twice drill once 
__________________
-Vinny 1983 911SC |
||
|
12-14-2005, 12:55 PM
|
|
|
|
Registered User
Join Date: Mar 2019
Posts: 1
|
Anyone have this same data to place 911 SC badge on a 1980 vehicle WITH tail?
|
||
|
03-25-2019, 05:19 PM
|
|
|
Registered
|
Bond.....
Colorado,
Ramones tag line complete with Connery introducing himself to the world? Fabulous 
__________________
Scott "Houston, Tranquility Base here, the Eagle has landed" Silver 1984 M491 Sunroof Coupe |
||
|
03-26-2019, 08:14 AM
|
|
|
Registered
|
I have a new duck and x factory grill so will place the 911S badge on the grill...looks good there
|
||
|
03-26-2019, 04:13 PM
|
|
1983 911SC
Zeus (god of thunder and lightning)
1985 Porsche 911
Beast
Porsche 911 S Modified
