Pelican Parts Forums
Page 2 of 2 « Prev 1 2
Show 40 post(s) from this thread on one page

Pelican Parts Forums (http://forums.pelicanparts.com/)
-   Porsche 911 Technical Forum (http://forums.pelicanparts.com/porsche-911-technical-forum/)
-   -   Bolt grading question (http://forums.pelicanparts.com/porsche-911-technical-forum/1030235-bolt-grading-question.html)

HarryD 05-24-2019 08:35 AM
Quote:
Originally Posted by GH85Carrera (Post 10469462)
The "nut" on the seat rails for my 85 Carrera are actually little blocks of steel, with a tapped hole. They are prevented from spinning by the seat rail themselves. I have no idea what rating they have, but the are not traditional nuts.
Most likely it is a M6x16 grade 8.8 cheese head screw.

From PET the screws are shown as part 19:

http://forums.pelicanparts.com/uploa...1558715641.JPG

Here is the information on the part.

http://forums.pelicanparts.com/uploa...1558715641.JPG

Harpo 05-26-2019 06:14 AM
This is the pan head torx drive that I'm using to attach my seats. I have some extras if your interested.

http://forums.pelicanparts.com/uploa...1558879922.jpg

Quickstep192 05-26-2019 02:09 PM
Quote:
Originally Posted by Harpo (Post 10471239)
This is the pan head torx drive that I'm using to attach my seats. I have some extras if your interested.

http://forums.pelicanparts.com/uploa...1558879922.jpg
Here’s a picture of my rail with the socket head cap screw in it. There’s almost no clearance side-to-side.

http://forums.pelicanparts.com/uploa...1558908552.jpg

HarryD 05-26-2019 02:51 PM
Quote:
Originally Posted by Quickstep192 (Post 10471626)
Here’s a picture of my rail with the socket head cap screw in it. There’s almost no clearance side-to-side.

http://forums.pelicanparts.com/uploa...1558908552.jpg
Looks about right.

Take one out, go to a good Hardware Store (one that has all those little bins of various nuts and bolts), a find something that has the correct geometry. Most likely a M6x15 cap screw.


All times are GMT -8. The time now is 03:00 AM.
Page 2 of 2 « Prev 1 2
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2025 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website


DTO Garage Plus vBulletin Plugins by Drive Thru Online, Inc.