Specialty Gauge

[zl0ca]

Has anyone here used Cory Shephard for gauge repair and calibration?
His prices seem fair but I can't seem to find much information on the work he has done on 911's/porsches. I've had pretty good luck with his communication where as I tried Contacting PA with no reply. NH replied 3-4 days later and Seattle replied but with 1 word answers.

[froggert]

He's the guy in Virginia, or thereabouts? If so, I used him to repair my odometer. Solid work, fast turnaround and fair price.

[zl0ca]

Originally Posted by froggert

He's the guy in Virginia, or thereabouts? If so, I used him to repair my odometer. Solid work, fast turnaround and fair price.

Yeah. He's right outside of DC. Thanks for feedback.

[bob deluke]

Z;
NSI in Greensboro NC is an authorized VDO repair shop. They repaired my speedo, calibrated, new needle and lens. Quick turnaround. Was very satisfied with their work.
Phone: 336-273-2881.

[zl0ca]

Thanks bob. I'll call them today

[914werke]

Use at your own peril.
Had a poor experience with Cory.
Only way I got my clock back was to report CC fraud.
Apparently that got his attention
Will not use again.

[lvporschepilot]

Originally Posted by 914werke

Use at your own peril.
Had a poor experience with Cory.
Only way I got my clock back was to report CC fraud.
Apparently that got his attention
Will not use again.

Same exact experience. I truly hate to give bad reviews. Cory is a very poor communicator and simply disappears for long periods, and his work is sub-par. A tach I sent him had to be recalibrated by another shop as it just wasn't accurate, I just didn't want to send it to Cory again as it took forever to get back in the first place. A speedo Cory rebuilt did not work, only the odometer did. I highly recommend NOT using Specialty Gauge.

[ChrisHoover]

PM me about my negative experience with one of those you listed