|
|
|
|
| Author |
|
|
Registered User
Join Date: Jun 2019
Posts: 20
|
1976 911 hvac control panel help
Hi All,
This is my 2nd post, and really hoping for some help. I recently purchased a new control panel face from Rennline Rennline Billet HVAC Control - Porsche-Rennline, Inc.) , however in removing the old face plate i realized part of my functionality issue, is that the little white grommets that keep the control arms aligned are missing causing the switches to not move back and forth correctly. I have tried a few very short screws but they imped the travel of the other arms. Wondering if anyone can either point me at a way to replace or upgrade the grommets or even point me to a new mechanical assembly. |
||
08-14-2019, 12:06 PM
|
|
|
Registered User
Join Date: Jun 2019
Posts: 20
|
adding a photo of what i need
|
||
|
08-14-2019, 12:36 PM
|
|
|
Registered
Join Date: May 2013
Location: Upper Midwest
Posts: 1,190
|
Your pic is not coming thru.
I do not know what grommets you are referring to. How complex of a design are they? Could they be printed out on a 3D printer if someone draws them up in a CAD program? Try posting the pic(s) again.
__________________
Who, What, When, Where, Why and How. |
||
|
08-14-2019, 02:08 PM
|
|
