930 gearbox cross member mounting in SC tub

[911tracker85]

this is also posted on the 930 forum.

I have been looking back for a few threads I had noted trying to find a couple posts about putting a 930 gearbox in an SC tub.

cant find them now, and unfortunately they did not give a clear view/understanding of how to do this. a new thread about putting a 3.3 motor and 930 gearbox in an SC tub reminded me I need to figure this out.

I have my tub ready for paint but first some welding. and would like to have figured out how I will mount the short bell housing 930 gearbox in my SC tub.

anyone got some good pics of this with a clear view of what is needed? and any tips / tricks?

pic just before I cut off the rear sway bar mounts to weld in the new/stronger ones.

thanks in advance.

[Trackrash]

I GOOGLED, 930 gearbox in an SC tub pelican , and go a bunch of hits. Give it a try.

[911tracker85]

did and as in the U2 song, "I still haven't found what I'm looking for...."

irony is most posts I found were my posts asking for info.