Pics of my Projects '77 3.0

[IMONBOOST]

I know you guys like pics so here you go.

Here is a peek at the newly finished inner fender:



Before:



After:




The torsion bar tube had to be repaired, this is why my CTR look a like project delayed so much:



I'm considering getting these wheels, they are 18 inch though:

[skinnerd]

imonboost:
Great pictures of the work you've done so far... how about some more details of what you actually did? Did you just clean the wheel wells or get into painting? From a spray can or did use use the good paint? I personally really like the wheels. Why not use 18"? Is this just a street car? Anyway.... great so far. Post more pictures and details.
Thanks -Doug

[IMONBOOST]

I have actually done very little of the work to the car (don't have much time). I left the car at a shop that is doing all the work and they have repainted the rear wheel wells and the torsion bar tube area. I want to go with those wheels but don't know how well they will fit, this car is a track car that will see some street time just for the fun of it.

[TerryBPP]

What type of wheels are those? There sweet.

[IMONBOOST]

The wheels are Fikse LM10s 18x8" and 18x10".

[pbs911]

Looks great! I love the orange. I think the 10's are going to be tight. I only have about 1/4 inch clearance between the tire and oil lines at the rear with my 9's, about 3/4's at the fender lip w/o rolling. If you reroute the oil line coming off the thermostate and roll the fender lips/more camber you should be fine. Be sure to check out the clearance before you buy them nontheless and realize you will have to have some fabbing done to mae them fit.

[Eric Mckenna]

ERIC