fender roller woes. i got it!

[mrrolleyes]

after putting some 5mm spacers on, i needed to roll my front fenders due to gouging a tire.

jimtweet laughed at me when i picked up a fender roller saying it wouldn't fit. well he was right.

So i picked up a 5x130 to 5x112 wheel adapter.

in the photo you can see im running a 5mm spacer and then some wheel bolts to hold the roller on. the stock studs are long so the roller is "sitting" on the wheel bolts. also the bolts had a 22mm head so i was just barely able to tighten them down.

this JUST clears allowing the roller to fit into the fender.

hope this helps some others

[aston@ultrasw.c]

Oh balls.

I just bought a fender roller...

[froggert]

I slotted out the holes on my roller. Fits 5x130 just fine now.

[911tracker85]

^^^^
me too. works fine that way.

[obscene]

this is the piece that you need to fit it to 5x130: https://www.eastwood.com/fender-roller-adapter.html

[mrrolleyes]

ahhh. it was a borrowed roller so it wasnt mine to cut up

[spuggy]

I thought everyone just used a baseball bat? S'what the PO used when he very kindly did mine before I bought the car

[ClickClickBoom]

Fender rolling