|
|
|
|
| Author |
|
|
Registered
|
Magnecore spak plug wires issues
87 Carrera
I have a set of Magnecor wire set for the last 10 years but some of the wires seem loose in connecting to the spark plugs. tightening the ends do not help much... 1. are the connectors on the Clewett engineering set sold by our host have better connectors? 2. Are RSR plug hold downs a good solution? can the valve covers still be torqued properly with hold down on? Last edited by david.avrahami@; 11-01-2020 at 02:21 PM.. Reason: want this heading |
||
11-01-2020, 08:34 AM
|
|
|
Registered
|
Magnecor spark plug wires issue
87 Carrera
I have a set of Magnecor wire set for the last 10 years but some of the wires seem loose in connecting to the spark plugs. tightening the ends do not help much... 1. are the connectors on the Clewett engineering set sold by our host have better connectors? 2. Are RSR plug hold downs a good solution? can the valve covers still be torqued properly with hold down on? Last edited by david.avrahami@; 11-01-2020 at 02:22 PM.. |
||
|
11-01-2020, 11:26 AM
|
|
|
Uncertifiable!!!
|
Clewett’s “click” into position and stay put on my twin plug setup. No need for plug hold downs unless you are off-roading, LOL.
Cheers, Johan
__________________
🇨🇦 The True North Strong and Free 🇨🇦 Living well is life's best revenge- George Herbert (1593-1633) 2006 C2S, 2024 WRX GT, 911 hot rods on Pelican…. Evolution of a Carrera RST, and Sweet Transplant |
||
|
11-02-2020, 03:18 AM
|
|
|
Registered
|
make sure you are on the plug and not wedged next to it. Should feel it snap on. Also make sure your plug have the heads screwed on.
Chris 89 Carrera |
||
|
11-02-2020, 09:34 AM
|
|
Porschen
RST
Ugly Duck
