![]() |
|
|
|
Registered
|
Finishing AC Removal
The prior owner removed all the AC components (and did not save them!) so I was looking at removing the air distributor located in the center which was used to take cold air to center vent and two small side vents... since they are now rendered useless with out the blower in the smuggler box nor a good source of air. (The side vents i could care less about but will look at T ing something off another main air hose to get the center vent operational as phase 2 of this project)
The air distributor (91157303100), i can not tell at this point what secures it to the body so i can remove and clean up abundance of clutter and hoses. Can anyone tell me how that unit is held in place..is it just a rubber grommet or something else? the wiring plug was cut in the cabin so removing that will be easy (oh oh..shouldnt have jinxed myself) lastly...is this a part one would sell on PP forum..dont know if they are in demand? bob 77 Targa (83 sc engine) |
||
![]() |
|
Registered
|
i removed the diverter and small diameter hoses...thanks, now just have to plug some holes
|
||
![]() |
|