Pelican Parts Forums

Pelican Parts Forums (http://forums.pelicanparts.com/)
-   Porsche 911 Technical Forum (http://forums.pelicanparts.com/porsche-911-technical-forum/)
-   -   Vibration...need help (http://forums.pelicanparts.com/porsche-911-technical-forum/1086084-vibration-need-help.html)

997at 02-14-2021 03:32 PM

Vibration...need help
 
Hi All. I have a recent issue that I'd like some advice on. Only under acceleration, and only in 4th and 5th gear there is a vibration that I can feel through the entire car. If I take my foot off the accelerator it goes away completely. Car idles fine and revs through full range without vibration while stopped. I've done a search and haven't found anything super useful yet. I've read it could be a misfire, bad CVs, engine mounts. For reference, I installed new axles about 8K miles ago as well as new engine mounts. Looking for any help on this one. It's bugging me like crazy!

dannobee 02-14-2021 03:56 PM

Are the axle bolts tight? I'd recheck asap, before it breaks something.

Vibration on acceleration is often a cv joint problem.

997at 02-14-2021 03:59 PM

Quote:

Originally Posted by dannobee (Post 11224858)
Are the axle bolts tight? I'd recheck asap, before it breaks something.

Vibration on acceleration is often a cv joint problem.

Thanks dannobee. Axle bolts are good and tight.

911obgyn 02-14-2021 06:53 PM

Grab axle and slide it in and out to see if its smooth could be new cv getting stuck.


All times are GMT -8. The time now is 08:26 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2025 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website


DTO Garage Plus vBulletin Plugins by Drive Thru Online, Inc.