|
|
|
|
| Author |
|
|
Registered
Join Date: Jul 2020
Posts: 73
|
Transmission Flange ID
I have these odd sized flanges that were too long for my transmission they stuck out when fitted. Can anyone tell me what they are from? They seem to be different to everything else. I cannot make out the part number cast on them.
The main shaft is ~61-62mm long which includes about 20mm of coarse spline section, the others I have seen are more like 56mm total length here. The oil seal section is 16-17mm long It takes 4x M10 bolts and 2x studs   
|
||
12-23-2021, 04:38 AM
|
|
|
gearhead
Join Date: Nov 2007
Location: Loverland, CO
Posts: 23,556
|
61mm is for LSD.
|
||
|
12-23-2021, 04:58 AM
|
|
|
Registered
Join Date: Jul 2020
Posts: 73
|
Quote:
I cant find a great deal of info out there about these but from what I can find I think these are for 69-75 factory ZF Clutch Pack LSD units and that they are fairly rare. However not being an expert by any means I was hoping for some confirmation before selling them. |
||
|
12-23-2021, 05:33 AM
|
|
