![]() |
|
|
|
Registered
Join Date: May 2004
Location: New Hampshire
Posts: 6,139
|
![]() ![]() I recently had an inquiry to Re-Make an oil Line for a 72 911. It is from the motor to the Oil Tank..... ![]() It is PN 911.107.720.11 and is vey expensive from Porsche if available at all. I have been re-making fuel & oil hoses & lines with new Rubber Hose and Crimps for many years, and can help anyone who may need a new replacement crimped to your original fittings. For info, please email me. Please, NO PM's. My box is almost always FULL. I do not like pms as we cannot send photos, and I prefer to show photos of what I offer. len.cummings @ verizon.net ![]() |
||
![]() |
|
Slippery Slope Expert
|
Is this the oil line you are talking about? Maybe not; this one doesn't have the 90 degree bend on the outboard end. Anyway I have one if you run across someone who needs it.
__________________
“As new technologies become indistinguishable from magic, and I can no longer tinker, the magic goes away for me.” |
||
![]() |
|
Registered
Join Date: May 2004
Location: New Hampshire
Posts: 6,139
|
![]() ![]() Steam Driver- This is similar, but actually a Cross Under oil line for a 74 911. Yes, I am a buyer of this depending on the price w/ shipping. My zip is 03287 in Wilmot, NH for a mail cost. my email is: len.cummings @ verizon.net Len ![]() |
||
![]() |
|