Pelican Parts Forums
Page 3 of 3 « Prev 1 2 3
Show 40 post(s) from this thread on one page

Pelican Parts Forums (http://forums.pelicanparts.com/)
-   Porsche 911 Technical Forum (http://forums.pelicanparts.com/porsche-911-technical-forum/)
-   -   Refuses to idle 83 sc (http://forums.pelicanparts.com/porsche-911-technical-forum/1118112-refuses-idle-83-sc.html)

hughc 09-12-2022 02:58 PM
Thanks all. Time to close this thread.
The WUR, the CSV, TTS and all injectors were sent to boyt911sc and were all checked for proper functioning and adjusted as necessary (WUR).
Everything has been re-installed , the engine fired up straight away and has been running quite nicely since. So I should be out of the woods for now.
Thank you for the great work, Tony.
hughc

boyt911sc 09-15-2022 05:28 AM
Everything was OK except the WUR.......
 
Quote:
Originally Posted by hughc (Post 11795609)
Thanks all. Time to close this thread.
The WUR, the CSV, TTS and all injectors were sent to boyt911sc and were all checked for proper functioning and adjusted as necessary (WUR).
Everything has been re-installed , the engine fired up straight away and has been running quite nicely since. So I should be out of the woods for now.
Thank you for the great work, Tony.
hughc

Hugh,

All I did was recalibrate the WUR to spec because it was “out of calibration”. All the other CIS components you sent were tested and confirmed good. Good job.

Tony


All times are GMT -8. The time now is 03:19 PM.
Page 3 of 3 « Prev 1 2 3
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2025 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website


DTO Garage Plus vBulletin Plugins by Drive Thru Online, Inc.