|
|
|
|
| Author |
|
|
Slippery Slope Expert
|
Throttle Pull Rod Lengths
I need a throttle pull rod that is about an inch longer than the stock SC version. This is for my EFI/964 plenum conversion. According to the parts listings here are the numbers of the versions that were available. Does anyone know the maximum lengths, fully extended, of these parts?
911.423.026.03 - 1970-‘73 911.423.147.00 - ‘74-‘77 911.423.043.00 - ‘78-‘83 SC 930.423.019.02 - ‘78-‘83 Turbo 925.433.026.01 - ‘78-‘83 Sporto 911.423.043.01 - 3.2 Any and all help and suggestions on this would be appreciated. I could just extend the one I have, of course, but I would rather not.
__________________
“As new technologies become indistinguishable from magic, and I can no longer tinker, the magic goes away for me.” |
||
05-06-2023, 12:40 PM
|
|
|
Registered Minimalist
|
I compared 3 of those with surprising results.
If I recall I had a rod from a 75 coupe, a 77 targa, and a brand new Porsche part from 70-73. The latter was the longest. The targa 77 the shortest.
__________________
Duane / IG: @duanewik / Youtube Channel: Wik's Garage Check out my 75 and 77 911S build threads |
||
|
05-07-2023, 08:02 AM
|
|
1975 Porsche 911s
