source for euro specs
 

Hi, I have a 78 row(euro) engine type 930.03 in my 77 911S. I am looking for a source for specs on this engine, especially CIS. Any book that includes Euro specs. Thanks Jerry

My factory spec books have three variants, US, Japan and RoW. Problem is that I've heard they are NLA.

Is there some implied permission to photocopy when a publisher will not make copies available of a given support document ?

Just remembered Wayne's book has a substantial table in the back.

I'm positive the 911 Performance Handbook has info in it for RoW cars. I am also inclined to believe that 101 Projects also has this information. I'll confirm that when I get home this afternoon.

I would also be interested in this. I was looking for WUR pressure/temp specs for a Euro regulator. The part number for the WUR is 911.606.105.09.

Re: source for euro specs
 

Yup, you definitely need to pick up both of the books I mentioned. Both are indisposable if you want to do any work yourself, or understand what your mechanic is talking about.

p. 102 (of the 1st edition) of 911 performance handbook has the specs for the 930/03 as far as displacement, valve size for intake and exhaust, port size, valve timing, compression ratio, HP and TQ. There is also a ton more of info smattered throughout the book, even for us Euro guys. 101 projects is awesome as well for DIY but doesn't have the specs you seek at the moment.

Tool over to the bookstore and flip through both of these; you won't be disappointed.

My book has all the specs for all the USA, Euro, and Japanese engines (and Canada) too. Long block and some FI info as well. The tech spec books are NLA. http://www.101projects.com

-Wayne

Wayne, I can't find the info! What section is it in 101?