![]() |
|
|
|
JOT MON ABBR OTH
Join Date: Feb 2001
Location: USA
Posts: 3,238
|
![]()
There is one vacuum hose that appears to have become unattached during all my journeys into the bay. One side of the hose is ~18 inches long and attached to the Deceleration Valve on one end. This goes to a T-Connection with one six inch section travels to the Throttle Housing. The other hose end is 2 feet? and not connected. The factory manuals show this hose as going to some connection on the motor, but the book does not identify what this connection is. It would also appear that there were two configuations for this connection on '80 to '83 cars with the other configuration going between only the Decl Valve and Throttle Housing. Any assistance is appreciated.
__________________
David '83 SC Targa (sold ![]() '15 F250 Gas (Her Baby) '95 993 (sold ![]() I don't take scalps. I'm civilized like white man now, I shoot man in back. |
||
![]() |
|
Registered
Join Date: May 2001
Location: Peoples Republic of Long Beach, NY
Posts: 21,140
|
![]() Quote:
but it may go to the thermo valve.. part# 911.606.106.01
__________________
Ronin LB '77 911s 2.7 PMO E 8.5 SSI Monty MSD JPI w x6 |
||
![]() |
|
Registered
|
I'm not sure if this also applies to a 1983?
![]()
__________________
John Adams 1980 ROW 911SC |
||
![]() |
|
Registered
|
I've got the EXACT same problem. I spent about an hour trying to figure out just where it goes. I did find something that said it goes to the throttle valve, but there's not pic of what and where this thing lives. I found this info on the emission sticker on the engine lid. I did find that it had suction, so I plugged it for now, but I would also like to find its home.
__________________
Matt '82 911SC Targa! |
||
![]() |
|