|
|
|
|
| Author |
|
|
Registered
|
993 dash in a '75 911?
Will it fit? Look out of place? Or is it basically the same thing?
There's one on ebay and mine is cracked. I'm thinking I could connect the vent to the fresh air duct.
__________________
Chris '75 911s 3.2 - Ice Green Metallic ‘87 951, '05 987 S '21 Jeep Gladiator ‘18 Tesla ModelX 100D, ‘20 Model 3 |
||
06-13-2003, 07:52 PM
|
|
|
Registered
Join Date: Apr 2002
Location: Santa Barbara, CA
Posts: 1,607
|
It fits just fine, I have one in my '75. Depends if you want to keep the car original or not. Good luck!
|
||
|
06-14-2003, 12:15 AM
|
|
|
Registered
|
Thanks MJ,
I already have a 3.2 in the car so originality went out the window already!
__________________
Chris '75 911s 3.2 - Ice Green Metallic ‘87 951, '05 987 S '21 Jeep Gladiator ‘18 Tesla ModelX 100D, ‘20 Model 3 |
||
|
06-14-2003, 05:28 AM
|
|
|
Registered
Join Date: Sep 2002
Location: MN
Posts: 1,041
|
I just picked one up for my 911SC...any issues putting this in?
__________________
1992 964 C4 Coupe (black/black) 1982 911SC Coupe (lt blue met/black) 1965 Mustang Fastback (black/black) |
||
|
06-28-2003, 05:40 PM
|
|
|
Registered
Join Date: Mar 2002
Location: houston
Posts: 84
|
I am in the process of installing a 993 dash in my 77 and have found the center ac vent requires sheet metal modifications to fit properly. The ac vent is larger as such the sheet metal needs to be cut about a 1/4 in to allow the vent to fit into the dash properly. The cut would only be noticeable is the dash pad was off but I am going to find an older style so I do not have to cut the dash.
greg |
||
|
06-28-2003, 06:15 PM
|
|
|
Registered
Join Date: Jun 2003
Location: White Lake, MI
Posts: 229
|
Great idear. Always wondered how these people (on ebay) have new dashes and center consoles and shifters in their 76 911s.
Now, about those little nobbie shifters that they have... |
||
|
06-28-2003, 09:21 PM
|
|
|
|
Registered
Join Date: Jun 2003
Location: White Lake, MI
Posts: 229
|
Email me pics???
|
||
|
06-28-2003, 09:21 PM
|
|
|
Registered
Join Date: Jul 2001
Location: Denver Area
Posts: 1,017
|
If you install the dash first it is very evident how much metal needs to be cut out or cut and bent back for the new larger vent to work. Basically you just cut down to meet the bottom of the dash pad.
__________________
Grady aka plain fan 66 912 - enjoying the good life 78 911 SC and 90 C2 turbo look cab - gone but not forgotten 01 996 TT -  09 Audi A4 Avant - daily driver |
||
|
06-29-2003, 08:44 AM
|
|
|
The Unsettler
Join Date: Dec 2002
Location: Lantanna TX
Posts: 23,885
|
I'd love to see some pics of this project. I'd love to have a console in my car. Might even be a way for me to get a cup holder in it.
Scott
__________________
"I want my two dollars" "Goodbye and thanks for the fish" "Proud Member and Supporter of the YWL" "Brandon Won" |
||
|
06-29-2003, 09:13 AM
|
|
1975 Porsche 911s 3.2
