Part Identification HELP!
 

I had some electoplating done last month. I sent the 27 lbs of miscellaneous metric hardware, and they sent back 47 lbs. I spent a couple of days sorting through the mound of hardware and was confidant I had done a decent job. I had basically sorted SAE and metric. The plater mixed my stuff with someone else’s items, and returned all of it to me. I have a good to recognize different threads. Some washers I had to measure. The other guys stuff pretty pitted and foreign to my recall.

The picture of the parts i’m trying to identify are in great shape, and not like the foreign items.

Anyone recognize what these are, and if they are off my ‘83 911SC?

The washer with the internal tang is not a strut top washer, they are dished and I have them installed. The other two washers with the stepped thickness don’t look familiar.

http://forums.pelicanparts.com/uploa...1727146093.jpg

The Mound
http://forums.pelicanparts.com/uploa...1727146669.jpg

The washers on the right look like they might go with the alternator pulley bolt.

You’re right, I had extra alternator hardware and these go behind pulley. Thanks ErrorMargin.

The others may be front axle American Car.