|
|
|
|
| Author |
|
|
1977 911S
|
Disconnected Connectors in engine bay
I just took the black plastic cover off to inspect my fuse panel in the engine bay as I’m troubleshooting a heater blower motor issue. First time inspecting this part of my car and noticed two connectors that aren’t connected to anything. What am I missing?
One is a black 3 pin connector next to CDI box. The other is a 1 pin connector that is transparent yellowish plastic close to the taillight assembly. The car is not a sportomatic but for some reason there is a fuse in that location - any ideas?    
|
||
09-03-2025, 09:32 PM
|
|
|
Registered
|
The black connector was for external regulator -you have alternator on the engine now with internal regulator..the brown wire is for the safety switch at the air flow sensor..here is some reading
1977 2.7 engine wiring problems Ivan
__________________
1985 911 with original 501 761 miles...807 506 km "The difference between genius and stupidity is that, genius has its limits". Albert Einstein. |
||
|
09-03-2025, 10:10 PM
|
|
911S
