Need Wiring/Fuel/Oil Connection Help Part 1.

[rennch]

Hi,

Yesterday I installed (With the help of fellow PelicanHead Pat Snyder) a 3 liter engine into my 72 T. There are still a few connections that I need to make, and I was hoping to enlist the help of a few of you.

First, my bottom oil line. I'm assuming I have to connect these two lines. I was planning on using the hard line on my 72 to mate these two together. Is that the right move?

Next,





These two lines, blue and pink, come from the back of what I'm guessing would be the equivalent of a throttle body on the 3.0 CIS engine. We connected the blue line to the vacuum advance on the distributor. Where does the pink go?

Does it go on the little red tab in this pic?



Same spot, a little further out:



How about that oil line hanging out there? I've got two spots coming out of the side of the engine compartment above the oil filter...what connects to what?

[rennch]

See Part II for more Q's...

[Neilk]

Do you have a fender mounted oil cooler for the 3.0?

[rennch]

Oh, and I forgot. On the pic with the blue and pink hoses, what connects to the electric plug hole to the left of the wires?

[rennch]

I, of course, meant to the left of the *hoses*.

mto

[rennch]

And here are all the pics together.

http://www.whirledmedia.com/EngineConnections/

[rennch]

Neil,

No fender mounted oil-cooler. Front cooler to come shortly.

[UTKarmann_Ghia]

Empto, little red tab provides vacuum to my cruise control system. Just keep her plugged if you dont need cruise.
My distributor looks different than yours and has a black and red tube going to it.
Hope this helps a little

[rennch]

bump. Still working on er...