Any idea where this seat part fits?

[Chris Lovell]

I was out on a beautiful day and zipped into my favorite store: Home Depot. A few bucks later, I was squeezing a really large and heavy boxed shelf system into the 911. Passenger seat folded back and box inside, I headed for home. The box came out after a healthy struggle and this part (pictured) was on the floor. I can figured out where it came from. Anyone have an idea? Thanks.
Chris L

[ChrisBennet]

The picture doesn't let me judge the scale but if it's about 2 inches long it could be the knob on the side of the seat (headrest?) for tilting the seat forward.
If its about 10" long it might be the cover for the motors on the bottom front of the seat.
-Chris

[Chris Lovell]

Maybe this pic will help someone figure this out. As Chris B predicted, it is about 2" long. I'll check the seat releases. Seems too obvious but I've been that dumb before.

[Chris Lovell]

Not the knob for the headrests, Chris. It is lightweight plastic. It looks as if it should fit over the seat hinge at the bottom of the back of the front seats but that isn't quite right. Anyway, still scratching my head. Thanks for chiming in.

I keep unsuccessfully attaching the second picture. Not my night.

[ChrisBennet]

Seatbelt loop cover on the B-pillar!
-Chris

[Chris Lovell]

Chris B, that was way too easy for you and particulary humiliating for me. I'm coming up sometime soon to meet you and drop off a case of cold ones. Thanks.