Targa bar cover restore

I am having my targa bar cover repainted black.

1.) What do I tell the paint shop, satin, flat, semi flat, semi gloss?

2.) Is it easy to take off, and how?

Thanks in advance,
AP

[steve911]

AP--
Don't take this the wrong way, but I'll be the first - do a search. There are several very good posts on doing this, complete with pictures. (I know, as I've done it myself, though I left the bar on the car.)

What you tell the shop is up to you - I personally used Wurth's Satin Black when I redid mine earlier in the year. I wanted some sheen, but not too much. I then waxed it to provide protection to the paint. Some have said that the Targa bar originally came from the factory as flat black - I think it depends upon the look you're after.

Removal is not too difficult (I'm told); there are 2 nuts in each rear wheel well that you have to contend with.

Good luck with it and post pictures when its done.

[VaSteve]

I did some searching since I wanted to know too. I found the link:

http://members.rennlist.com/5150targa/page3.html

Tell me if you try it, I don't have a garage, so I'll probably be outsourcing this work!!

Steve