![]() |
|
|
|
Binge User
|
CV Joint Gaskets
I called our gracious host to order some CV joint gaskets & was a bit annoyed that the shipping charges were as much as the parts. So I thought I'd call the dealer & save myself some time. I mean really how much more could they possible want, Pelican is asking $1.25. I called up the local dealer gave her a part # & she told me she'd have to order them (of coarse). I asked her how much & she told me $14.85, I asked "For all four?", she replied "No, a piece."
![]()
__________________
Paul |
||
![]() |
|
Registered
Join Date: May 2001
Location: Peoples Republic of Long Beach, NY
Posts: 21,140
|
Re: CV Joint Gaskets
Quote:
maybe she was ovulating ?
__________________
Ronin LB '77 911s 2.7 PMO E 8.5 SSI Monty MSD JPI w x6 |
||
![]() |
|
Registered
Join Date: Sep 2002
Posts: 3,580
|
You can cut them out of gasket paper. Works great, costs <$1. Just takes a bit of time.
__________________
993 |
||
![]() |
|
Senior Member
Join Date: Nov 2000
Location: Great NorthWest
Posts: 3,941
|
The gaskets come with the new boots I found out this AM from JohnW. If you are doing the CVs, you might be in need of boots, and if so, there are your gaskets!
Paul: I am just about to regrease my CVs now that I've found the proper Valvoline 985 Synth/Moly. What's interesting is that, on one joint, the darn balls fell out. Now some folks told me "That's it - order new" but I am told otherwise as well - that the CVs are quite saveable even with the balls falling out via worn edges. So I will be regreasing these puppies and painting the shaft, etc. New boots all around, 8Mx50 and Schnorr washers to boot. John
__________________
'78 Targa in Minerva Blue |
||
![]() |
|
Registered
Join Date: Aug 2003
Location: Palo Alto, CA
Posts: 159
|
Dealer prices
I check brake pad prices at the dealer, 3X on PP.
Screws for the door panels and bracket for Cat heat shield were very reasonable. |
||
![]() |
|
Registered
Join Date: Feb 2002
Location: Near Albuquerque, New Mexico
Posts: 1,076
|
![]()
I had to do it too recently, I just grouped a few small orders into one, then I went with Wayne and the boys-
Also, I find that USPS shipping is cheapest for me on this stuff.
__________________
-Rickeolis- 1986 Corvette Last edited by rickeolis; 12-29-2003 at 12:14 PM.. |
||
![]() |
|
Registered
Join Date: Jan 2003
Location: San Jose, CA
Posts: 124
|
We call that "P-car tax". :-) As much as everyone trys, you can minimize it by going through people like Pelican but you can never seem to totally dodge it.
Kenrinc- |
||
![]() |
|
Registered
Join Date: Jan 2002
Location: Birmingham, AL
Posts: 774
|
I had a buddy of mine in the parts business price those gaskets for me just last week, and full retail on them is about $15.00 each! Highway robbery for sure....
__________________
Brian Starr Alabama Region PCA 1983 911SC/Rebodied as 993 w 3.6 1995 911 C2 (Sold) |
||
![]() |
|