weber questions
 

I am looking for jets for my carbs

Anyone have experience with Redline Weber?

Back in the day when I used to work in the auto biz Redline was the importer for Weber to the US. I saw some very cool stuff in there R&D shop back in the mid 80's. However, Now I get most of my weber parts from Pierce Manifold. They have good prices and have had everything in stock I ever needed for IDA, DCNF or IDF carbs.

do you happen to know what their phone # is or if they have a web site

Thanks,
kyle

http://www.piercemanifolds.com/

I just bought oversize throttle shafts from them, a little pricey, but I don't really have anything for comparison. Their tech department is very helpful, overall very good to deal with.

I too have had good experience with Pierce Manifolds. Parts and boring a set of old Webers for oversize throttle shafts...they did a good job and have all the parts you could need for IDA3C's.
Jack

here is the link for Pierce

http://www.piercemanifolds.com/

PS: PMO is good too

You can also get'em from PMO.

Jack,

How much was the T/S re bore and repair from Pierce?

The line bore and oversize shaft parts ran about $125 from memory. That was for 1 carb only. The other bank was not rattling. Of course, Pierce re-assembled the body and it was ready to go when I got it back.

Jack

Go to PMOCARB.com The service is outstanding and the prices are competitive. Richard is an asset to the 'Weber' community.

I second Richard at PMO. He may do everything by fax, but it does happen quickly.

WWW.PMOCARB.COM