|
|
|
|
| Author |
|
|
Registered
Join Date: Apr 2002
Posts: 292
|
anyone with the torque value on springplate cover?
I can't seem to find the torque value on the spingplate cover over the rear torsion bar. Anyone knows this?
Thanks, John |
||
05-13-2004, 08:58 AM
|
|
|
Registered
|
I don't know the torque value, but I would offer the opinion that it's not that important. Not alot of load on those fasteners. I would simply tighten them by hand. That's what I did on mine...
Mike
__________________
Mike 1976 Euro 911 3.2 w/10.3 compression & SSIs 22/29 torsions, 22/22 adjustable sways, Carrera brakes |
||
|
05-13-2004, 09:12 AM
|
|
|
Registered
Join Date: Jun 2003
Location: Visalia CA
Posts: 77
|
I don't know but I stripped the threads on one bolt hole on mine by overtightening.
__________________
1978 widebody targa |
||
|
05-13-2004, 09:50 AM
|
|
|
Somewhere in the Midwest
Join Date: Oct 2001
Location: In the barn!
Posts: 12,499
|
I believe 34 ft-lbs. Definitely not the 70+ that I mis-read when I was doing mine...thought it was weird after doing one side, then went back and re-read.."FUCH! It's 30-something!" ...it's 34 if memory serves me right.
|
||
|
05-13-2004, 09:54 AM
|
|
|
Registered
Join Date: Apr 2002
Posts: 292
|
I stripped one torquing it to 60+ ft-lbs
|
||
|
05-13-2004, 01:02 PM
|
|
1976 Porsche 911
