|
|
|
|
| Author |
|
|
Registered
Join Date: Apr 2003
Location: Las Cruces, NM
Posts: 2,459
|
Confused Wires
Ok, i believe there should be three wires going to the starter. One which is the large red one. The other two according to the wiring diagram that i printed out says it should be two yellows, but i have a blue and yellow wire. The blue one is cut as well. Any ideas?
__________________
2007 Mazda 3 hatch 1972 Porsche 914 roller with plenty of holes to fix 
|
||
04-04-2004, 01:31 PM
|
|
|
SCWDP- Shock and Awe Dept
|
those two wires connect to the same spot, usually one connects to the starter and the other to that one.
__________________
Ryan Williams, SCWDP '81 911SC Targa 3.6 '81 911SC Coupe 3.2 #811 '64 VW Camper Bus, lil' Blue |
||
|
04-04-2004, 01:34 PM
|
|
|
SCWDP- Shock and Awe Dept
|
here's a good pic that was just posted, don't worry about the color if they are all there together.
__________________
Ryan Williams, SCWDP '81 911SC Targa 3.6 '81 911SC Coupe 3.2 #811 '64 VW Camper Bus, lil' Blue |
||
|
04-04-2004, 01:35 PM
|
|
|
Registered
Join Date: Apr 2003
Location: Las Cruces, NM
Posts: 2,459
|
Wow man your good, thanks again! I wish i had a wiring harness that was that nice.
__________________
2007 Mazda 3 hatch 1972 Porsche 914 roller with plenty of holes to fix
|
||
|
04-04-2004, 01:37 PM
|
|
|
SCWDP- Shock and Awe Dept
|
__________________
Ryan Williams, SCWDP '81 911SC Targa 3.6 '81 911SC Coupe 3.2 #811 '64 VW Camper Bus, lil' Blue |
||
|
04-04-2004, 01:39 PM
|
|
|
Registered
Join Date: Apr 2003
Location: Las Cruces, NM
Posts: 2,459
|
Just to verify, i have the wiring diagram in front of me, it says that there are four wires that go to the starter, a yellow and blue that go together to that little nipple, and a black and red that go together. I have the large red one that's part of the wiring harness, and i assumed that the black one is that large one that comes out of the chassis next to the tranny on the starter side, is this the correct assumption?
__________________
2007 Mazda 3 hatch 1972 Porsche 914 roller with plenty of holes to fix
|
||
|
05-17-2004, 08:25 PM
|
|
|
1981 Porsche 911SC Targa 3.6
