911 engine swap roll call - Page 2

jhelgesen · 06-29-2004, 04:32 AM

1976 912e
1979 sc 3.0, euro cis

MuffinMan · 06-29-2004, 04:59 AM

Add another 3.6 conversion to the list:

1977 911S
1997 3.6 Varioram engine
Factory 993 heat exchangers with Triad muffler

Link to my conversion project/progress thread

Heat routing for Triad muffler

Dyno results (with video link)

(the only engine pic I had handy was before everything was finalized)

Silveresrty911S · Silveresrty911S's Garage

'77 targa with 3.2 US, wong chip and euro pre-muff

tholyoak · 06-29-2004, 06:23 AM

1990 3.6 (with 993 intake and exhaust and Thom's sexy carbon fibre tube) into 80 SC Targa

speedo · speedo's Garage

'73 coupe...RS conversion
'79 3.0 w/ SSIs...2-in-1-out
Iris Blue...chrome blacked out
Pics coming....

Paul Thomas · 06-29-2004, 06:41 AM

1970 T with dual-plug 3.5 MFI
Lame-ass-cams soon to be replaced with RSR cams.

ttweed · ttweed's Garage

1973 911E originally, came to me with a stock 1980 3.0 SC engine and tranny already in it. I upgraded the suspension and added RS bits and ran it for a couple of years until I had a mis-shift at WSIR and bent valves. Swapped in a 3.4 based on a 3.2 case and crank with new 98mm Mahle Sport 10.3:1 pistons and cylinders, Carrillo racing rods, special "Otto-grind" WebCams, Aase Bros. racing valve springs, and PMO 50mm carbs. Put 930 brakes on it and rebuilt the 915 with billet intermediate plate and GT diff.

chuckw951 · 06-30-2004, 08:34 PM

No other transplants? Bump

cowtown · 06-30-2004, 08:43 PM

'75 911S (stripped out) with stock '77 930 engine (euro setup). 2250lbs, 260HP.

Adelgigs · 06-30-2004, 11:56 PM

I bought my '81SC with a stuffed motor and had to do the rebuild with very little knowledge. My build is documented here www.adelgigs.com/911enginerebuild.htm

Enjoy.

chuckw951 · 07-10-2004, 08:19 AM

Bump. I know there are more hotrods here.

rennch · rennch's Garage

72 911 T w/79 3.0 SC engine. Early Exhaust/muffler.
Getting all dorked up for SCCA A Street Prepared competition.

petevb · 07-10-2004, 09:47 AM

-70 non sunroof coupe, welded cage
-89 3.2l with headers, etc
-double adjustable JRZ coilovers, TRG swaybars, no rubber bushings
-915 w/ wevo gateshift, shifter, GT diff
-S4 brakes under 8/9 x 16 fuchs
-2200 lbs, 224 rwhp

It’s good fun…

Todd Simpson · 07-10-2004, 12:19 PM

-71 non sunroof coupe, welded cage
-84 Euro 3.2l, SSI's, sport muffler
-22/28's, hard bushings, etc.
-early 7/31 915
-Carrera/SC brakes under 8/9 x 16 fuchs
-2200 lbs, 207 rwhp

Bill Verburg · Bill Verburg's Garage

Some nice rides here!

Mine

'76 Carrera 3.0 w/ 993 3.8 RS, 915/67/lsd, 993RS brakes, Ruf bumpers, Kinesis 8&9.5x17, 235.45 7 275/40 tires.

Az911 · 07-10-2004, 03:50 PM

Year: 1972
Model: 911T
Engine: 1980 3.0

Az911 · 07-10-2004, 03:58 PM

Quote:

Originally posted by petevb
-70 non sunroof coupe, welded cage
-89 3.2l with headers, etc
-double adjustable JRZ coilovers, TRG swaybars, no rubber bushings
-915 w/ wevo gateshift, shifter, GT diff
-S4 brakes under 8/9 x 16 fuchs
-2200 lbs, 224 rwhp

It’s good fun…

I remember this car. It was very fast out on the track even before all the crazy suspension was put in. Were is the car at now?

petevb · 07-10-2004, 04:04 PM

Imported to the SF bay area from AZ. It took a while to get the coilovers sorted by it's working well now...

Az911 · 07-10-2004, 04:10 PM

Have anymore pics of it?

Rufblackbird · 09:52 AM

I don't consider this a hotrod...but oh well.

'72 911T Targa w/ '78 California SC motor, K&N filter

, 964 turbo look...that's all I know. Plans for a backdate and conversion to Speedster with MFI motor in the works...well...as soon as I pay off the car first.