Pelican Parts
Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   Pelican Parts Forums > Porsche Forums > Porsche 911 Technical Forum


Reply
 
LinkBack Thread Tools Rate Thread
Author
Thread Post New Thread    Reply
Registered
 
adamred's Avatar
 
Join Date: Nov 2002
Location: New Jersey
Posts: 1,169
Garage
Thinking of a repaint...advice sought

My petrol blue beauty is looking a bit tired, plus the paint on the right front fender is cracking, which bothers the s@#t out of me...

Was tooling around during lunch today and dropped by my favorite local body shop just to hear their thoughts (unfortunately, "crash" my wife has had her Expedition in there twice in 18 months, so they know me...)

He took a good look at my car... basically said he wouldn't do a spot repair of the fender because I would never like how it looked. He quoted me $3K-$4k to take the car apart, plastic bead blast it, primer and paint the original color, assuming no major body work once they strip it down....

He's done a bunch of older 911s, said it would take around 1 month. I assume new moldings, etc are extra.... Thoughts?

The funniest thing is that wherever I go people always comment on the color and how beautiful the car is, imagine if the paint was actually in good shape!

__________________
Adam,
2019 BMW 540i
Old 07-09-2004, 10:54 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #1 (permalink)
Registered
Adam,

Could you pass along the name and location of the shop? Always good to have contacts. You can PM if you'd like.
__________________
Warren & Ron, may you rest in Peace.
Old 07-09-2004, 10:58 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #2 (permalink)
Registered
 
adamred's Avatar
 
Join Date: Nov 2002
Location: New Jersey
Posts: 1,169
Garage
No problem

The place is called Sevells in Westfield....here's their website...

http://www.sevells.com/

Rick, what are your thoughts on price....too cheap?

Adam
__________________
Adam,
2019 BMW 540i
Old 07-09-2004, 11:09 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #3 (permalink)
Registered
 
adamred's Avatar
 
Join Date: Nov 2002
Location: New Jersey
Posts: 1,169
Garage
Oh and by the way, paint is not original anyway (but it is the original color of the car) so I wouldn't be taking value away by claiming a repaint, its already been done....
__________________
Adam,
2019 BMW 540i
Old 07-09-2004, 11:13 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #4 (permalink)
Designer King
 
Paulporsche's Avatar
 
Join Date: Mar 2004
Location: Toronto, ON Canada
Posts: 5,499
That price sounds good. Here in Toronto a good shop will want more like $9-10,000 Canadian, which would be around $6500USD.

Just my 3 cents.

Paul
__________________
Paul
Yellow 77 Sunroof Coupe/cork interior; 3.2L SS '80 engine/10.3:1/No O2; Carrera Tensioners; 11 Blade Fan; Turbo tie rods; Bilstein B6; 28 tube Cooler; SSI, Dansk; MSD/Blaster; 16x7" Fuchs/205/50 Firestone Firehawk Indy 500s; PCA/UCR, MID9
Never leave well enough alone
Old 07-09-2004, 12:35 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #5 (permalink)
Gon fix it with me hammer
 
svandamme's Avatar
 
Join Date: Sep 2003
Location: In Flanders Fields where the poppies blow
Posts: 23,537
Garage
i payed 4K in Euro's to have mine repainted, and some welding

that was after i already took it apart and stripped the under coating and everything...
__________________
Stijn Vandamme
EX911STARGA73EX92477EX94484EX944S8890MPHPINBALLMACHINEAKAEX987C2007
BIMDIESELBMW116D2019
Old 07-09-2004, 12:46 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #6 (permalink)
 
Registered
Re: No problem

Quote:
Originally posted by adamred
The place is called Sevells in Westfield....here's their website...

http://www.sevells.com/

Rick, what are your thoughts on price....too cheap?

Adam
Adam,

It does sound pretty inexpensive.
I guess if you see the quality of their work then you're one step ahead. What type of paint do they use? Single stage job? Warranty/Guarantee?
__________________
Warren & Ron, may you rest in Peace.
Old 07-09-2004, 12:52 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #7 (permalink)
Registered
 
adamred's Avatar
 
Join Date: Nov 2002
Location: New Jersey
Posts: 1,169
Garage
Thanks Rick-
Have to check the details, not sure about the type of paint....

What was that someone was saying about the slippery slope of 911 ownership....I'm hopelessly hooked....
__________________
Adam,
2019 BMW 540i
Old 07-09-2004, 01:23 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #8 (permalink)
Registered
 
Join Date: Jan 2004
Location: Chicago, IL
Posts: 415
Adam,

I recently had a glass-out, complete dissassembly respray with some accompanying metal work on my SC. The guy has been a bodyman for 38 years, owns a couple of 911s, and does P-cars as his part time job. He lives 150 miles from my house, but I felt that he was well worth the drive. He uses only Sikkens paint and charged me $4500. It turned out great, although there are a couple of minor issues that he wants to address just before I put the car up for the winter. Prior to that, I received other estimates in the Chicago area ranging from $6500-$9500.....and one of those higher estimates wanted to tape off my rear window instead of removing it. That sounds like a very good price, but you might want to carefully inspect some of the other cars that he's performed "refreshes" on.

Steve
__________________
'82 911 SC
Old 07-09-2004, 02:04 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #9 (permalink)
Registered
 
gduke's Avatar
 
Join Date: Jul 2003
Location: carson city, nv
Posts: 407
Steve, I live in Eastern Ia., about 180 mi from Chicago. Could you tell me the name and address of the shop you mentioned. Especially, interested if its near the Quad Cities.
__________________
1985 911 Carerra Cab 3.6l
1998 Dodge Ram
2004 Toyota Tundra Quad Cab
Old 07-09-2004, 02:32 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #10 (permalink)
nice doggie
 
Hetmann's Avatar
 
Join Date: Oct 2002
Location: Denver, CO
Posts: 1,478
I think the price is very good. I don't see how he could do it for that. There is a lot of prep involved in getting ready to paint and a lot of assembly after you have got it blocked, sanded and polished.
__________________
Jerry

78 SC hotrod
02 Mini Cooper S
Old 07-09-2004, 03:13 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #11 (permalink)
Registered
 
Join Date: May 2003
Location: Orinda, CA
Posts: 3,140
Garage
I've researched this in So Cal, and the price for a "tear down, bare metal repaint" was between $5500 to $8000. This was a range from 5 different shops.
Old 07-09-2004, 03:20 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #12 (permalink)
Registered
 
adamred's Avatar
 
Join Date: Nov 2002
Location: New Jersey
Posts: 1,169
Garage
Hey Jerry! Haven't seen you around in a while, too busy out there enjoying the rebuild!

Anyway, yeah I thought it was cheap, I said to him, "what do you think, $5-$6K", he said, no way, 3-4 max....surprised was I.....

I'll be shopping it around....anyway, going to deal with some mechanicals before paint anyway...this winter is a powertrain winter, maybe next winter is a body winter....

Adam
__________________
Adam,
2019 BMW 540i
Old 07-09-2004, 05:18 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #13 (permalink)
Licensed User
 
Shuie's Avatar
 
Join Date: Feb 2003
Location: ....down Highway 61
Posts: 6,506
I was just quoted $7500 to take mine all the way down, block everything, and make it perfect. This price was on the condition that I remove and re-install all trim etc. $3k-$4k for a windows out bare metal job is a steal if the guy is good.

Old 07-09-2004, 05:58 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #14 (permalink)
Reply


 


All times are GMT -8. The time now is 05:51 AM.


 
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2025 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website -    DMCA Registered Agent Contact Page
 

DTO Garage Plus vBulletin Plugins by Drive Thru Online, Inc.