|
|
|
|
| Author |
|
|
Registered
Join Date: Jun 2004
Location: Friendswood, Tx
Posts: 392
|
Altrom (Brembo) 094 1805 rotors
Hey Guys,
Last week I picked up a set of NIB drilled rear rotors for my 84 Carrera that are labeled ALTROM GROUP 094 1805 (1 right, 1 left) that have the correct diameter, but thickness is much thinner. Don't have the thickness numbers here, but are thinner than my worn rotors. To keep it short, I've researched Brembo and Porsche stuff, cannot find this number nor one for my 84 rears. What do I have, what do I need? Total brake job soon. Thanks guys... 
|
||
07-19-2004, 06:26 PM
|
|
|
Registered
Join Date: Oct 2003
Location: London Ont Canada
Posts: 3,120
|
I think you have stock rotors from 1983 and older They are 20mm thick new Carrera rotors are the same dia but 24mm thick
__________________
1980 911 SC 3.6 coupe sold 1995 993 coupe 1966 Mustang Shelby clone 1964 Corvair Spyder Turbo gone 2012 Boss 302 |
||
|
07-19-2004, 06:41 PM
|
|
|
Registered
Join Date: Jun 2004
Location: Friendswood, Tx
Posts: 392
|
Thanks johnsmjc,
I really thought the sc rotors were smaller diameter also. Didn't know this diameter was standard till 84. I can see'em for what I have in'em, but the seller said they were 84+ rotors. Not my first mistake. Wished I could find a better Brembo rotor listing, is there better info not found by searches? I use www.dogpile.com and find most, but time is too rare. |
||
|
07-19-2004, 06:54 PM
|
|
|
Registered
Join Date: Oct 2003
Location: London Ont Canada
Posts: 3,120
|
Our host has a lot of brake part info and parts at competative prices.
__________________
1980 911 SC 3.6 coupe sold 1995 993 coupe 1966 Mustang Shelby clone 1964 Corvair Spyder Turbo gone 2012 Boss 302 |
||
|
07-20-2004, 04:56 PM
|
|
