|
|
|
|
| Author |
|
|
Registered
Join Date: Aug 2004
Posts: 9
|
1989 911 valve adjustment
I'm trying to adjust the valves on my 89 911 speedster. The pelican page tells me tdc is when the z1 mark on the crankshaft pulley lines up with the notch in the fan housing. My car does not have a z1 marking. Also, there are two notches on my pulley almost right next to eachother I assume one of these is z1. Which one? And is that the mark (z1) that is for the number one cylinder, or is it the mark right next to it? Help!!!!
|
||
08-07-2004, 06:47 AM
|
|
|
Make Bruins Great Again
|
Welcome to the BBS. The first one is free (you get a little slack cause you're new but in the future people will get on you if you don't use the search button first). There are a bazillion posts about this. Here's one:
Where's "Z1" TDC mark on my 3.2?
__________________
-------------------------------------- Joe See Porsche run. Run, Porsche, Run: `87 911 Carrera |
||
|
08-07-2004, 07:10 AM
|
|
|
Registered
Join Date: Aug 2004
Posts: 9
|
Thanks for your post, brand new to bbs, didn't pay attention to the search button. Btw this forum kicks butt. Thanks all. Rob
|
||
|
08-07-2004, 11:45 AM
|
|
Max
