|
|
|
|
| Author |
|
|
Registered
Join Date: Nov 2002
Location: Kansas City
Posts: 715
|
Is this cylinder shot?
All the other pistons and cylinder's look great, no scoring or anything odd. This one looks like the hardened coating might be wearing through and there's some scoring down the side, not too pretty and I'm guessing I should replace ... thoughts?
It's out of a 2.0S motor. Will any Mahle 2.0 cylinder replace this, or is it 'S' specific. I know the pistons are S specific, and also that some cylinders of the basic 911 were cast Iron, but what about a later T, or E 2.0 cylinder? 
__________________
Current: 1975 911S --Chocolate brown Past: 1967 911S --Bahama Yellow 1990 C2 Targa --Silver 1973 914 2.0 --Delphi Green Last edited by RetroSC; 08-23-2004 at 08:22 PM.. |
||
08-23-2004, 07:33 PM
|
|
|
Registered
Join Date: May 2003
Posts: 3,346
|
Yes you'll need to fix or replace. It could be bored oversize but then you'd need a new piston. Don't know which models you could get a replacement from. You could also upgrade to bigger cylinders and have a 2.2. I'd post a WTB ad and see if Uncle Zak or someone else has a part to help you.
-Andy
__________________
72 Carrera RS replica, Spec 911 racer |
||
|
08-23-2004, 09:01 PM
|
|
