|
|
|
|
| Author |
|
|
Registered
Join Date: Jan 2001
Location: Dallas
Posts: 29
|
Fresh air intake seal
Anybody ever replaced the fresh air intake seal before. I ordered the seal from our host and I can't quite figure it out. Here is a pic of the seal and the parts:
 The obvious is the seal goes around the "frame", but it just doesn't look right. Any clues? Thanks,
__________________
Jim B. '84 911 Targa '11 F250 '01 Stang GT |
||
10-24-2004, 11:05 AM
|
|
|
Registered
Join Date: Jan 2001
Location: Dallas
Posts: 29
|
Bump - nobody has ever replaced this before?
__________________
Jim B. '84 911 Targa '11 F250 '01 Stang GT |
||
|
10-24-2004, 06:07 PM
|
|
|
Gasoline User
|
There is no seal used on the intake grill. That seal looks like the one that is used around the opening on the black plastic plenum where it fits to the air intake. You can remove the plenum to replace this seal by removing the 2 screws that are visible now that you've removed the intake grill.
I can post a pic if you need,
__________________
Bob V 1974 911 Carrera coupe Grand-Prix-weiß 1977 930 turbo Carrera coupe Hellgelb 2018 Cayenne turbo Schwarz 2019 911 GT3 RS Schwarz |
||
|
10-24-2004, 06:56 PM
|
|
1974 911 Carrera
1977 Porsche 930
2019 GT3 RS Weissach
2018 Cayenne turbo
