|
|
|
|
| Author |
|
|
Registered
Join Date: Jul 2000
Location: Bend, OR USA
Posts: 372
|
Intermediate Shaft Cover Gasket, Dry or Coppercoat?
I'm replacing the intermediate shaft cover gasket.
I have sanded the cover flat and understand the torque should be around 6 foot pounds. Do folks suggest I install the gasket dry or with some KW Coppercoat? Or anything different? Thanks. Ian |
||
01-23-2005, 10:16 AM
|
|
|
Registered
Join Date: Nov 2002
Location: Arlington, VA
Posts: 1,045
|
Suggested installation is dry, but never hurts to copper-coat or spread a little curil-t to both sides of the gasket.
__________________
Charlie Stylianos 1982 SC Targa www.Dorkiphus.com - (The Land of the NoVA/DC/MD Porschephiles) |
||
|
01-23-2005, 12:51 PM
|
|
|
Registered
Join Date: Nov 2003
Location: West of Seattle
Posts: 4,718
|
I used loctite 574 on one side of the gasket, and WD-40 on the side with the studs.
__________________
'86 911 (RIP March '05) '17 Subaru CrossTrek '99 911 (Adopt an unloved 996 from your local shelter today!) |
||
|
01-23-2005, 03:05 PM
|
|
