Pelican Parts Forums
Page 2 of 2 « Prev 1 2
Show 40 post(s) from this thread on one page

Pelican Parts Forums (http://forums.pelicanparts.com/)
-   Porsche 911 Technical Forum (http://forums.pelicanparts.com/porsche-911-technical-forum/)
-   -   Is there a link between diameter of sway bar and stock mounts tearing out? (http://forums.pelicanparts.com/porsche-911-technical-forum/203098-there-link-between-diameter-sway-bar-stock-mounts-tearing-out.html)

Miguel Antonett 01-25-2005 07:38 AM
89911, where is that plate located? Could you zoom out the picture to see how the plate/bar is attached?

Wil Ferch 01-25-2005 07:43 AM
89911:
I'm not quite sure what I'm looking at...but I have a sense of where the "view" is on this shot.

I'll bet you also have stiffer-than-stock rear TB's....( 28-31 ??) That's the key !

Wil

Jeff Alton 01-25-2005 11:27 AM
Okay great, in the way home today car starts making funny rattling sound in the left rear. Finally broke the other mount. GRRRRR. Time to get out the welder!! What timing, I new I should not have replied to this thread in the first place!!!

Jeff

89911 01-25-2005 12:28 PM
The angle of the shot would be looking up at the mount from the left rear wheel. I have 30mm tbars in the back with a 30mm hollow SR sway bar. It is attached to the torsion bar tube.


All times are GMT -8. The time now is 10:08 AM.
Page 2 of 2 « Prev 1 2
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2025 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website


DTO Garage Plus vBulletin Plugins by Drive Thru Online, Inc.