Pelican Parts Forums

Pelican Parts Forums (http://forums.pelicanparts.com/)
-   Porsche 911 Technical Forum (http://forums.pelicanparts.com/porsche-911-technical-forum/)
-   -   Aussie Track Day (http://forums.pelicanparts.com/porsche-911-technical-forum/204892-aussie-track-day.html)

Fishcop 02-05-2005 07:28 PM

Aussie Track Day (pics)
 
Here's some "very me" orientated photos of yesterdays trackday at Queensland Raceway in Australia. All photo credits go to Pelican Steve Foss who also lurks on this board.:)

A lot of the cars tend to be the later GT3 etc... so I've stuck to the older "cooler" cars in these photos :D

I had a bit of freak spin caused when my camber bolts let go and the rear left popped from -3 to +1 degrees mid-corner. The result was a high speed spin and damage to my tyre as it rubbed on the guard!

http://forums.pelicanparts.com/uploa...1107663423.jpg

http://forums.pelicanparts.com/uploa...1107663462.jpg

http://forums.pelicanparts.com/uploa...1107663524.jpg

http://forums.pelicanparts.com/uploa...1107663602.jpg

http://forums.pelicanparts.com/uploa...1107663701.jpg

http://forums.pelicanparts.com/uploa...1107663751.jpg

And I'm pleased to say the engine I built recently passed it's first trackday really well!

http://forums.pelicanparts.com/uploa...1107663895.jpg

Can't wait to get some Elephant Racing polybronze rear bushes and 27mm rear torsion bars as my rear is definitely too soft :o

Cheers

SteveF_911 02-05-2005 08:29 PM

Great photos.

Looks like a bit of a hot day though

GettinHeadStuds 02-05-2005 08:31 PM

Wood.

The Chef 02-05-2005 08:45 PM

Looks like $hits and giggles John!

Fishcop 02-05-2005 09:20 PM

Geez SteveF_911 you should have been there... ;)

Yeah guys it's always good fun out there... we have some really talented and very quick guys and gals in the club. As Steve notes, it was really hot yesterday with around 35 0C (someone will have to calculate what that is in F) making it a little uncomfortable in and out of the car!

RSBob 02-05-2005 09:36 PM

BRAVO! Nice to see the cars as they are meant to be driven!

Fishcop 02-05-2005 09:40 PM

I should also note that the RS is real and being driven as it was meant!

obrut 02-05-2005 09:48 PM

your car looks sensational john

Fishcop 02-05-2005 10:01 PM

Thanks Ryan! It's great to be going as good as it looks now too :D

OZCarrera3 02-06-2005 03:20 PM

Now I'm really p*ssed that I decided not to do Saturday's run!

Your car looks great John, I hope you didn't do too much damage to the guard. What sort of times did you do?

Also are you going to head up to Morgan park in March? I'll definitely be there this time.

By the way, great photo's too Fossy!

:cool:

SIR70T 02-06-2005 03:43 PM

John ,

Your car looks fantastic in its natural habitat!

Shane

al lkosmal 02-06-2005 03:45 PM

I like those air filters. Where do you get those??

Victor 02-06-2005 04:12 PM

Is that your double driving the white car #78?

Fishcop 02-06-2005 10:08 PM

Nah Victor, just similar helmets and goatees :)

A few people have enquired about the intake pods... http://www.unifilter.com.au/

Good news is that there was more smoke than heat and my guard polished out. The tyre will have to be checked out though.

dd74 02-06-2005 11:38 PM

John - nice shots. What size T-bars do you have in the car now?

Fishcop 02-06-2005 11:51 PM

Hi Dave

Currently rear SC (24mm), but I have 27mm on the way. Fronts are the original 19mm.

dd74 02-07-2005 12:16 AM

Quote:

Originally posted by Fishcop
Hi Dave

Currently rear SC (24mm), but I have 27mm on the way. Fronts are the original 19mm.

I currently have 26s in the rear and 19mm up front. Tyson like this combination, although I am in flux about 22/28s - I have those waiting as well.

How much does your car weigh? I suspect my '74 with a 3.0 is a bit heavier than your car. Nonetheless, I don't experience any "sag" while on the track. Of course, I may not be pushing my car as hard as you push your car.

Fishcop 02-07-2005 01:23 AM

It's 2190 lb with spare tyre, tools and full tank of gas. I currently get a lot of sag/squat in 1, 2, and 3rd gear.


All times are GMT -8. The time now is 12:07 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2025 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website


DTO Garage Plus vBulletin Plugins by Drive Thru Online, Inc.