Please identify this front spoiler...

[TonyG]

I'm looking to get an original version of this.

Here's a pic that was in the GT Racing catalog.

Can you identify this, is it available still? If not, anybody know where I can get one?

Thanks

TonyG

[BeauBlues]

From what I believe, that spoiler came with the slant nose 911's.

[RickM]

The top pic looks to be from the 930S but could also be fitted onto any car with front turbo flares. Some manufacturers also made a narrow body version of the top spoiler.

The bottom is a different design that I've never seen. Looks to be similar but has an additional rubber lip and circular (brake duct?) cutouts as opposed to foglight cutouts.

Edit: The bottom does look to be the narrow body version with an add on lip and foglight inserts. AIR may carry this type of spoiler. I dont believe it was ever made of metal.

[Slant930]

As Rick states, those were never made in metal, only fiberglass or polyurethane.

[MACHINEMON]

If you find one, could I borrow it to make a mold from? I work with advanced composites and I would be glad to share parts form the mold....Joel

[RickM]

Joel,

Do you want a narrow body version or wide body?

Where are you located?

[Fl Ted]

I would like one also, so I can front mount my oil cooler.

[TonyG]

I want a narrow body version.. so I can mount my a/c condenser :-)


TonyG

[MACHINEMON]

I am in Texas, just south of Austin. My car is a stock body 1975 911s. I will put up some photo's soon. It should not be hard to make a mold and just do a hand layup, vacuum bagged, air temp cure on the part. I do not have access to an autoclave right now. I would love to find a piece to make to sell. They could be made cheap enough so a 'spare' would not be too expensive to have around. Materials should be $40-$60 or even less depending on how many layers it needs.

[RickM]

Sounds like a great idea. I'd love to have a spare around here. I've had mine repaired a couple of times.

Points you may want to consider:

-Would the spoiler work on early, mid and SC/Carrera cars. It wont work with a wide body.

-Shipping may be where the price goes up.

-If you can't find a narrow version you may be able to cut and reconfigure a wide version.

-Consider making from a (more) flexible material.

-Improve design to accept a front grill and/or screen. I had to do all custom. I will share the design if interested.

[MuffinMan]

I purchased this spoiler from GT Racing. It is marketed as the 930S spoiler, and I have a narrow-body car. I do not recall if it was/is available for a widebody.

[Fl Ted]

Boy, talk about not seeing the forest for the trees!!
These front spoilers are available in many variations and either F/G or carbon fiber, from GT Racing(www.gt-racing.com) as stated in the very first post!! Duuhh! The picture in that post is from their catalog AS STATED ON THE PICTURE!! They run $465.00
for any version. They have many F/G body parts for porsche, all geared toward hard-core racing, but if you want your Porsche to loose weight, this is the place to go !!
Ted

[Yellowbird RS]

930 S front spoiler w/oil cooler openig size (21.5" x 5.25")